term1 Definition1term2 Definition2term3 Definition3
Please sign in to your Google account to access your documents:
Thermocouples are connected in series to:
1) Generate a higher voltage
2) Increase the sensitivity of the detection system
3) Monitor more than one flame source
4) Generate a lower voltage
5) Provide a spare thermocouple in case of failure of one
Generate a higher voltage
Flame rods:
1) Should be cleaned of deposits regularly
2) Require frequent filing of electrical contacts to prevent corrosion build-up and failure of the device
3) Should not be exposed to temperatures above 100ºC
4) Should shut off the fuel within four seconds of flame failure
5) Are very reliable and maintenance free
Should shut off the fuel within four seconds of flame failure
A flame rod:
1) Forms an electric circuit with the rod, flame and burner
2) Is used for gas and oil fired burners
3) Forms an electric circuit with the rod, flame and relay
4) Senses the temperature of the flame
5) Is used to light the main burner
Forms an electric circuit with the rod, flame and burner
During the start-up, a boiler equipped with an automatic control system and a flame, scanning device, the main fuel supply valve:
1) Must be closed before ignition
2) Should be opened as soon as the pilot valve opens
3) Must be opened before ignition can take place
4) Can be opened before the flame scanner sees a flame
5) Can be opened any time during start-up sequence
Must be closed before ignition
Need help typing ? See our FAQ (opens in new window)
Please sign in to create this set. We'll bring you back here when you are done.
Discard Changes Sign in
Please sign in to add to folders.
Sign in
Don't have an account? Sign Up »
You have created 2 folders. Please upgrade to Cram Premium to create hundreds of folders!