term1 Definition1term2 Definition2term3 Definition3
Please sign in to your Google account to access your documents:
What is the working duration for a SDBA SET?
31 minutes at 50 litres per minute consumption rate.
What is the weight of a DRAGER Pss 7000 BA Set?
15.5kg
Define STOPCAB
1. Self contained
2. Two stage
3. Open circuit
4. positive pressure
5. Compressed
6. Air
7. Breathing apparatus set
What are the following features of STOPCAB?
1. Positive pressure, first breath activated
2. Speech diaphragm
3. Additional flow button
4. Stable air supply with low breathing resistance
What are the features of the Facemask?
1. Coloured black
2. Has double reflex seal
3. Exhalation valve
4. Lung demand valve
5. Outer mask
6. Inner mask
What are the features to a FPS 7000 face mask?
1. Made from dermatic rubber, with double reflex seal.
2. Held in place by a five strap adjustable harness.
3. When not in use, supported by neck strap and stud to hold it into wearers chest.
4. Impact and scratch resistant polycarbonate visor- gives wide interrupted field of vision and provides airtight seal of mask.
5.within main mask, inner mask prevents misting and build upon carbon dioxide.
6 Air controlled from medium pressure supply hose to mask via 'first breath' button.
7. Air flows into main mask via two ports just inside visor
8. Air drawn into the inner mask through two inhalation non return valves when the wearer inhales.
9. Exhaled air closes Ldv, cutting off incoming air supply. Passes to the atmosphere via the spring loaded exhalation valve.
10. Speech diaphragm provided to aid communication.
What is the purpose of a lung demand valve?
- Supplies air at breathable pressure to meet the demands of the wearer, whatever their workmate requirements may be.
What is the purpose of quick release couplings?
-This allows the wearer to supply or recieve air in an emergency exchange of air.
What is the purpose of the reducer?
-To assist with the reduction of cylinder pressure to a breathable pressure.
There are three non kink rubber, flexible air hoses that lead from the reducer. These are?
1. High pressure air hose to Emu. 300 bar
2. Medium pressure air hose leading to LDV- provides air to wearers mask once it has been reduced.
6-9 bar
3. Medium pressure air hose leading to second person connection used to assist other wearers low on air.
What are the five features of a bodyguard 7000?
1. Monitoring the available air pressure of the compressed air cylinder
2. Time to warning- numeric display.
3. Time of warning- indicated by flashing LEDs and audible warning.
4. Visual Led indicators- ( green- operational mode, key removed, red/blue - warning mode and blue - telemetry signal)
5. Motion sensor, and automatic distress signal unit.
When would the low battery warning signal operate?
1. When the battery drops below 5.5 volts
2. The unit emits a beep every nine seconds
3. It is acceptable to use the set for up to two hours.
Solid green - fully charged
Single flash green - charging (fast)
Double flash green - fault, battery temperature too high or too low.
Solid Amber - fully charged but drained.
Single flash amber- charging low capacity
Double flash amber- fault battery low capacity or battery temperature too high/low
When would the low pressure warning device and LED warning lights operate?
Pressure gauge reading is 84 bar
When would the pneumatic low pressure warning whistle operate?
74 bar (+/-5 bar)
What is the safety margin period for BA wearers?
12 minutes at 50 Lpm.
What information do you add to a BA tally?
Using a China graph pencil
1. The role and name of wearer
2. The cylinder pressure
3. The actual entry time into the risk area. (clock on ECB )
Need help typing ? See our FAQ (opens in new window)
Please sign in to create this set. We'll bring you back here when you are done.
Discard Changes Sign in
Please sign in to add to folders.
Sign in
Don't have an account? Sign Up »
You have created 2 folders. Please upgrade to Cram Premium to create hundreds of folders!