Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
22 Cards in this Set
- Front
- Back
STP Convergence Step 1
|
Elect the root bridge
|
|
STP Convergence Step 2
|
Each non-root selects a root port
|
|
root port
|
best path to root bridge
|
|
STP Convergence Step 3
|
For every link, one designated port is selected
|
|
STP Convergence Step 4
|
All other ports set to blocking
|
|
BPDU
|
bridge protocol data units
|
|
All switches examine the _______ in the BPDU
|
Bridge ID
|
|
The _____ Bridge ID wins root
|
lowest
|
|
Bridge ID =
|
2 byte priority field + 6 Byte Mac address + VLAN ID
|
|
Priority can be adjusted in increments of...
|
4096
|
|
The default priority is
|
32768
|
|
MAC address ends up determining the
|
root bridge
|
|
The root bridge can also be set by the
|
macro command
|
|
STP Root port tiebreaker process
|
Lowest cost path to root device
Lowest sender bridge ID Lowest Port ID |
|
STP Port States
|
Blocking
Listening Learning Forwarding |
|
Blocking Port State time
|
20 sec max age
|
|
Listening Port State time
|
15 sec
|
|
Listening Port State time
|
15 sec
|
|
Total discard datagram state time
|
50 sec
|
|
Portfast usage
|
edge port, server or workstation
|
|
uplinkfast use
|
speeds up convergence at access layer switch when redundant connection lost to distribution layer
|
|
backbonefast use
|
Saves on Max Age timer when indirect link failure occurs
|