Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
17 Cards in this Set
- Front
- Back
What needs to be enabled before OSPFv3 for IPv6 is configured? |
ipv6 unicast-routing |
|
Configure an OSPFv3 for IPv6 router-id of 1.1.1.1 |
router-id 1.1.1.1 |
|
Enter OSPFv3 for IPv6 configuration mode; use process-ID "1" |
ipv6 router ospf 1 |
|
Can you use the "network" command in OSPFv3 for IPv6 configuration mode? |
No |
|
Enable OSPF area 0, process ID 1, in interface configuration mode |
ipv6 ospf 1 area 0 |
|
Display the OSPFv3 for IPv6 neighbor stable |
show ipv6 ospf neighbor |
|
Can an OSPFv3 for IPv6 neighborship be formed using global unicast addresses? |
No |
|
True or False: OSPFv3 neighbors can be configured in ipv6 router configuration mode |
False |
|
Configure the IPv6 OSPFv3 neighbor "FE80::2" |
ipv6 ospf neighbor FE80::2 |
|
Which 2 LSAs does OSPFv3 for IPv6 rename? |
Type 3 Type 4 |
|
Which 2 LSAs does OSPFv3 for IPv6 add? |
Type 8 Type 9 |
|
In OSPFv3 mult-family configuration mode, process ID 1 |
router opsv3 1 |
|
In OSPFv3 multi-family configuration mode, enter ipv6 unicast address family configuration |
address-family ipv6 unicast |
|
In OSPFv3 multi-family process ID 1, configure an interface for IPv4 area 0 |
opv3 1 ipv4 area 0 |
|
In OSPFv3 multi-family process ID 1, configure an interface for IPv6 area 51 |
ospv3 1 ipv6 area 51 |
|
Can an OSPFv3 for IPv4 router peer with an OSPFv2 router? |
No |
|
What does OSPFv3 multi-family use as its transport? |
IPv6, for both |