Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
94 Cards in this Set
- Front
- Back
Another name for frequency?
|
Hertz
|
|
Red wavelength spectrum?
|
600-700nm
|
|
Green wavelength spectrum
|
500-600nm
|
|
Blue wavelength spectrum
|
400-500nm
|
|
How to measure a wavelength? |
The distance between corresponding parts of two consecutive waves
|
|
What determines the color of light from the transmission source?
|
A wavelength
|
|
What is the common term for the line the represents the radius of the wave radiating from the point source?
|
A ray of light
|
|
Waves that pass a fixed point in a given unit of time is called __________.
|
Frequency |
|
The three primary colors are ____, ____, & _____. |
Red, Blue and Green |
|
What is the infrared portion of the spectrum
|
1.) It is a portion of the spectrum invisible to the human eye 2.) It ranges from 700-1500nm |
|
What is the speed of light in a vacuum?
|
|
|
What happens when light strikes a polished surface?
|
It reflects in a specular manner |
|
What can light be transmitted through?
|
|
|
What can light NOT be transmitted through?
|
Opaque mediums
|
|
When light strikes a medium at a right angle (90degrees) what is it considered? |
A normal ray of light
|
|
When light vibrates in only one plane what is it called?
|
|
|
What 3 things must be true for and object to be seen as a distinguishable color?
|
2.) The color must have the ability to reflect that colors wavelengths 3.) The object must absorb other wavelengths |
|
Standard unit for measuring color temperature
|
Kelvin |
|
What is Soft light?
|
|
|
What is Hard light?
|
Light that creates harsh shadows; |
|
What is the optical center of a lens?
|
A point within the lens at which the rays of light from two sources entering the lens are assumed to cross
|
|
How is focal length expressed?
|
|
|
What are the two factors that determine the speed of a lens? |
Focal length & the diameter of the aperture opening
|
|
What are all the f/stops on a 35mm camera? |
1; 1.4; 2; 2.8; 4; 5.6; 8; 11; 16; 22; 32; 45; 64 |
|
When you close down one stop what does it do to the light hitting the image sensor?
|
It halves the amount of light hitting the image sensor |
|
When you open up one stop what does it do to the light hitting the image sensor
|
It doubles the amount of light hitting the image sensor |
|
What is the only method for determining the f/stop when the camera is on automatic or program mode?
|
|
|
What is Hyper Focal distance?
|
The distance from the lens' optical center to the nearest point in acceptably sharp focus when the camera is focused on infinity
|
|
What happens when you switch to a lens with a shorter focal length and a smaller aperature?
|
The hyper focal distance becomes shorter
|
|
What is depth of field?
|
|
|
What is resolving power?
|
It is the ability of the camera to record or resolve fine detail |
|
The combination of what two things create resolving power?
|
Lens speed and the image sensor |
|
On a 35mm camera where can you find the depth of field scale?
|
On the barrel of the lens or the camera body |
|
Why is photographic definition subjective?
|
therefore the concept depends on each individual observer and the situation they are in |
|
What 4 factors determine the photographic definition of a print?
|
Resolution, Sharpness, Pixilation, and Tonal Reproduction
|
|
What 4 factors control the depth of field for a lens
|
Focal length, f/stop, size of the circles of confusion, and subject distance
|
|
What does lens distortion do to the image?
|
It causes the lines to appear curved or bent |
|
Why do colors fringe around image points? |
|
|
What causes Chromatic aberration?
|
It is caused by the lens' inability to bring all the colors of the visible spectrum to the same plane of focus |
|
If horizontal lines are in focus but vertical lines are not, it is a sign of what problem in your lens
|
|
|
What is a coma caused by?
|
The inability of a lens to bring oblique rays of light to a common point with equal magnification and brightness |
|
Why do some lens manufacturers incorporate spherical aberration into a portrait lens?
|
(making people look a little better) |
|
What is Curvilinear distortion?
|
A distortion of straight lines due to the lens
|
|
What two effects can be caused by curvilinear distortion?
|
1.) An outward convex/ barrel effect 2.) An inward convex/ concave effect |
|
What are the two types of flare?
|
Optical and Mechanical |
|
Which type of flare is caused by a small reflective scratch on a lens shade?
|
Mechanical |
|
Which type of flare is generally present in most lenses with more than one element? |
|
|
Why are lenses coated with transparent colored material?
|
To minimize internal reflections and thereby reduce optical flare until it is virtually nonexistent |
|
What is the approximate lens coverage for a normal lens?
|
45 degrees/ near the angle a human eye views things |
|
What focal length is considered to be normal for a 35mm camera?
|
|
|
What are two advantages of using a wide angle lens?
|
2. Wider subject area than a normal focal length lens at a given lens to subject distance |
|
What is the biggest disadvantage of using a wide angle lens? |
|
|
What is a basic design element of all telephoto lenses?
|
The all include a positive element in front of and separated from a negative rear element |
|
How does compression apply to a telephoto lens?
|
Distant objects appear larger than normal perspective and enhances objects such as the sun and moon (Think pirate telescope) |
|
There are 3 disadvantages of using a zoom lens, what are they?
|
2. Loss of lens speed 3. With more elements within the lens you have a higher rick of facing problems such as diffraction and refraction |
|
What is the macro lens designed for?
|
Tiny objects; distances at scales larger than life 1:1
|
|
What are two disadvantages of using a macro lens?
|
Short depth of field; Reduction of light striking the object |
|
What are the two types of fish eye lenses? |
180 Full frame or 360 circular frame |
|
How would you know the proper procedures to follow if a camera is subjected to hazardous conditions?
|
Ask maintenance |
|
How should you use canned air to clean glass surfaces?
|
Hold the can 8-10" from the surface and apply in short bursts |
|
Explain shotgun shooting
|
Shooting every angle and every f/stop// hoping for one good photo |
|
Why does daylight shift toward the red portion of the spectrum at sunrise and sunset?
|
|
|
What is white balance?
|
|
|
Why is a bright sunny day not always the best time of day for photography?
|
The sun casts harsh dark shadows and bright highlights |
|
What is the ideal lighting ratio for a digital camera?
|
|
|
What is the best lighting for a group photo?
|
|
|
What is the best lighting for a raised or textured surface? |
Sidelighting
|
|
What is the best lighting for producing silhouettes?
|
Backlighting |
|
Gas flames at a high kelvin temperature appear what color?`
|
Blue and green with tips appearing yellow
|
|
When a flame gets hotter what happens to the Kelvin temperature?
|
It raises to a higher Kelvin number
|
|
Why should you never touch a new quartz halogen bulb with your bare fingers
|
Your fingerprints can etch into the bulb and cause it to shatter |
|
What determines the color produced by a fluorescent tube light?
|
The color of phosphor coating
|
|
What is the Kelvin rating of the photoflood No.1?
|
3200 Kelvin |
|
What computations are usually involved with exposure control of manual electronic flash units?
|
Guide numbers, f/stops, and distance
|
|
Why are flash units good at saving battery power?
|
The capacitor is usually only partially discharged each time it fires
|
|
There are 3 factors you must consider when using a flash indoors, what are they?
|
The color of your subject The size of the room |
|
What is one of the first precautions when using an automatic flash unit?
|
|
|
What is the major advantage of using a dedicated flash? |
|
|
What is the max focal length for a lens used with most wide-angle flash adapters?
|
|
|
What is the type of rating given for the measurement of the light output of flash units? |
|
|
What is WATT seconds?
|
|
|
What is a major advantage in choosing bounce flash over direct flash?
|
|
|
If your sync cord for the flash is defective what other method of flash photography can you use?
|
|
|
What is open flash?
|
Leaving the shutter open while you make one or more flash exposures |
|
Leaving the shutter open long enough to fire flashes from different locations in order to light evenly is called _____ with _______.
|
Painting ; light |
|
The key element in multiple image flash photography is _______________?
|
A fast recycling of thryistor type electronic flash unit or stroboscope |
|
Under outdoor lighting conditions where should you hold the flash to simulate sunlight?
|
|
|
What determines the flash output level in matrix fill flash? |
The microcomputer automatically chooses the flash output level determined by the combination of brightness and degree of contrast |
|
In the equation E= I x T, what do I and T represent?
|
Intensity & time |
|
What speed rating is twice as slow as ISO 400
|
|
|
What are some of the most common range of shutter speeds for a camera?
|
|
|
What does the number 4 represent on the shutter speed dial?
|
1/4th of a second
|
|
Moving the shutter from 1/60th to 1/250th changes the exposure by how many f/stops?
|
|
|
|
|