Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
30 Cards in this Set
- Front
- Back
How many tie down points are there on the F/A-18A+ aircraft with a drop tank?
|
2 Nose, 3 on each main mount, 1 on each wing (2),1 Tailhook. 11 total
|
|
What is needed to secure an a/c in a hanger?
|
chocks, brakes set, red grear and covers.
|
|
What is needed to secure an a/c on the line?
|
Brakes set, chocks, covers and chain IAW with maint.
|
|
How many ground safety pins are there on an F/A-18A+?
|
Eight. nose wheel, one on each main mount, tailhook, one on each wing fold, seat and canopy.
|
|
How many tie downs are required for heavy weather ashore/afloat?
|
12/24
|
|
What information is found in the A1FA18-MRC-250?
|
Daily produres
|
|
How many Delta-P's are on the F/A-18A+ aircraft? Where are they?
|
18- Nose wheel well; three in each main wheel well 1 hyd, 2 case drain; 1 in each AMAD; 1 in each engine; 1 for each VEN; and 2 ???????
|
|
What is the difference between symmetrical and asymmetrical tie down?
|
Symmetrical is the same number of chains on one side that is on the other side.
Asymmetrical is where there is a different amount of chains on one side then there is on the other. |
|
What is the proper procedure for grounding an aircraft?
|
Hook the ground strap to the ground point first then to the aircraft.
|
|
How many grounding receptacles are there with two wing pylons installed and where are theylocated?
|
9-one in the nose wheel well; one in the fuel door(door 8);2 in each main wheel well; one in the tailhook tie down point door; one on the rear of each pylon.
|
|
What is the first procedure for a turnaround inspection?
|
Check the ADB
|
|
What material is required to complete a daily inspection?
|
MRC-250, tool pouch, cranial, fuel sample kit,stab gauge, PPE
|
|
What is the first procedure for a daily inspection?
|
Check the ADB
|
|
How long is a daily inspection good for?
|
72 hours or 24 on flights.
|
|
How many total fuel sample points are there with 2 drop tanks?
|
8
|
|
How much fuel is to be drained into a fuel sample jar?
|
1 pint
|
|
When are fuel samples to be taken?
|
2 hours after fueling to allow for the fuel to settle; on a Daily
|
|
Who can inspect fuel samples?
|
310 CDI, QA, Pilot, 310 supervisor.
|
|
How long are fuel samples good for?
|
24 hours
|
|
How many chains are required for a hot seat?
|
3 Chains
|
|
What material is required for a hot pump?
|
chocks; two fire bottles; fuel truck; tug and tow bar; grounding strap.
|
|
A plane captain can taxi an A/C aboard ship? True or False
|
False; only a qualified shipboard directors (yellow shirts)
|
|
What doors are to be open before the pilots walk?
|
10L,10R, 14L, 14R, 9.
|
|
Where are the 5 locations circuit breakers can be found on a F/A-18A+?
|
10L, 10R, cocpit
|
|
What is the first thing to be done once an A/C is shut down during a recovery?
|
ground the aircraft
|
|
What is the safe distance from turning A/C during fueling/defueling
|
50 feet
|
|
What is the minimum safe distance from airborne radar during fueling/defueling?
|
100 feet
|
|
What is the minimum safe distance from ground radar during fueling/defueling?
|
300 feet
|
|
In regards to fastener integrity, what constitutes a downing discrepancy?
|
any leading edge, forward of the intake,one missing fasteners allowed in a panel with less then 30 but not on the leading edge, mo more then two total; minimum of 10 between missing fasteners
|
|
How many personnel are needed to fuel an F/A-18A+
|
2- one to fuel, one to stand on the fire bottle as the saftey.
|