Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
What materials form the bases of the 3 types of hydraulic fluids?
|
1. Vegetables
2. Minerals 3. Phosphate-esters |
|
What colors denote mineral-based and phosphate-ester based hydraulic fluid?
|
Mineral = RED
Phosphate ester = light PURPLE |
|
What are the results of exposing lacquers, oil-based paint, plastic resins, and vinyl compounds to phosphate-ester based hydraulic fluid?
|
The materials will be damaged and/or softened, or the paint will peel.
|
|
Name several sources used to develop hydraulic pressure.
|
1. hand pumps
2. engine-driven pumps 3. electrically driven pumps |
|
What would cause the bypass valve in a hydraulic filter to open and allow unfiltered fluid to circulate in the system?
|
A clogged filter element.
|
|
Describe several methods of pressurizing a hydraulic reservior.
|
1. Engine bleed air
2. system pressure acting on a small piston in the reservior. 3. using variable-displacement hydraulic pumps |
|
what feature prevents engine damage if an engine-driven hydraulic pump seizes or is overloaded?
|
A shear section in the driveshaft will break, disconnecting the pump from the engine.
|
|
Describe the purpose of a pressure relief valve.
|
Pressure relief valves limit the maximum pressure produced by the pump, thereby preventing failures of the system components.
|
|
Engine-driven pumps deliver the output fluid flow in what 2 forms?
|
1. Constant volume
2. Variable volume |
|
Describe the operation of a gear type pump.
|
2 meshed gears, driven by a power source, rotate in a housing. Inlet fluid is carried around the outside of the gears and delivered to the outlet side as the gears rotate.
|
|
Describe the purpose of a pressure regulator.
|
Pressure regulators manage the output of the pump to maintain system pressure.
They allow the pump to be unloaded so it turns without significant resistance |
|
What is the device that is used in some systems to supplement the pump output during periods of high demand?
|
An ACCUMULATOR
|
|
What are the 3 different type of accumulators?
|
1. piston
2. diaphragm 3. bladder |
|
What safety precautions must be taken prior to disassembling an accumulator?
|
release all of the air or PRELOAD
|
|
When a hydraulic unit is replaced, what precautions should be taken to avoid contamination of the system?
|
All lines should be capped or plugged immediately after they are disconnected.
|
|
What types of components or systems are pneumatically operated in some aircraft?
|
1. landing gear
2. brakes 3. flaps 4. other mechanical actuators |
|
Name several sources of pneumatic power.
|
1. storage bottles
2. engine bleed air 3. engine-driven compressor 4. vane type pump |
|
what happens to excess pressure in a pneumatic system?
|
a relief valve vents it overboard
|
|
What is the function of a restrictor in a pneumatic system?
|
To control the rate of flow of the airflow
|
|
What are the reasons for periodically purging a pneumatic system?
|
To remove moisture and contaminants
|