Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
7 Cards in this Set
- Front
- Back
SYS pb
(GPWS panel) - OFF - FAULT Light |
OFF:
All basic GPWS alerts (Mode 1 to 5) are inhibited. FAULT LT: This amber light comes on, along with an ECAM caution, if the basic GPWS mode 1 to 5 malfunction. |
|
G/S MODE pb
(GPWS panel) - OFF |
OFF:
Glideslope mode (mode 5) is inhibited. |
|
FLAP MODE pb
(GPWS panel) - OFF |
OFF:
Flap mode (“TOO LOW FLAPS” mode 4) is inhibited. (To avoid nuisance warning in case of landing with flaps setting reduced). |
|
LDG FLAP 3 pb
(GPWS panel) - OFF |
ON:
Flap mode is inhibited when FLAPS CONF 3 is selected (to avoid nuisance warning in case of landing in CONF 3). In this case, LDG MEMO displays FLAPS ... 3 instead of “CONF... FULL.” |
|
TERR pb
(GPWS panel) - OFF - FAULT Light |
OFF:
Inhibits the Terrain Awareness Display (TAD) and Terrain Clearance Floor (TCF) modes. Does not affect basic modes. If OFF is selected the ECAM caution NAV GPWS TERR DET FAULT is displayed. FAULT LT: TAD or TCF mode fails. The terrain is not shown on the ND. The basic GPWS mode 1 to 5 are still operative if the SYS pb OFF or FAULT lights are not illuminated. |
|
PULL UP - GPWS pb
(Instrument panel) - PULL UP Light - GPWS Light |
PULL UP:
Comes on red + specific voice alert when the second boundary of Mode 1 is penetrated, or when Mode 2, or any TAD or TCF alert is activated. GPWS: Comes on amber + specific voice warning when any other mode is activated. |
|
TERR ON ND pb
(Instrument panel) - ON - OFF |
ON:
The terrain is displayed on the ND, if the: - TERR pb is selected ON, and - TERR FAULT light is not on. The ON light comes on. OFF: The terrain data is not displayed on the ND. |