Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
8 Cards in this Set
- Front
- Back
How do you configure the priority for VLAN 4? |
spanning-tree vlan 4 priority x |
|
How would you configure the port cost for VLAN 4? |
spanning-tree vlan 4 cost x |
|
What are the two ways you can set the BID priority for vlan 4? |
1. spanning-tree vlan 4 root primary | secondary 2. spanning-tree vlan 4 priority x |
|
How do you set portfast for an interface? |
sw1 (config-if)# spanning-tree portfast |
|
How do you set BPDU Guard on an interface? |
sw1 (config-if)# spanning-tree bpduguard enable |
|
What are the three Spanning-Tree port types? |
1. Network port: these are for connections between 2 switches, a feature called bridge assurance is enabled on these ports. 2. Normal port: These are normal spanning tree ports 3. Edge port: Connected to hosts, and enable PortFast |
|
How would you configure an Ethernet port as an edge type? |
sw1 (config-if)# spanning-tree port type edge |
|
What are the commands to make spanning-tree edge type and bpduguard the default on a Nexus switch? |
sw1# spanning-tree port type edge default sw1# spanning-tree port type bpduguard default |