Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
161 Cards in this Set
- Front
- Back
- 3rd side (hint)
A data communications network that spans a large geographic area such as a state, province, or country
|
WAN
|
|
|
These use the services of carriers such as the Regional Bell Operating Companies (RBOCs), Sprint, MCI, and VPM Internet Services, Inc. to establish the link or connection between sites.
|
WAN
WANs |
|
|
Network that connects workstations, peripherals, terminals, and other devices in a single building.
|
LAN
LANs |
|
|
A WAN operates at the ______ layer and the ______ layer of the OSI reference model.
|
physical
data link |
|
|
______ provide for the exchange of data packets and frames between routers and switches and the LANs they support.
|
WANs
|
|
|
______ offer many services, including internetworking and WAN interface ports.
|
Routers
|
The device itself
|
|
______ include interface voice-grade services, channel service units/digital service units (CSU/DSUs) that interface T1/E1 services, and Terminal Adapters/Network Termination 1 (TA/NT1s) that interface Integrated Services Digital Network (ISDN) services.
|
Modems
|
What device is this description referring to?
|
|
CSU stands for ______.
|
channel service units
|
|
|
DSU stands for ______.
|
digital service units
|
|
|
The agency ISO is the __________.
|
International Organization for Standardization
|
|
|
The IETF is the __________.
|
Internet Engineering Task Force
|
|
|
The EIA is the __________.
|
Electronic Industries Association
|
|
|
A user device where the interface connects to the WAN link
|
Data Terminal Equipment
DTE |
|
|
Data circuit terminating equipment end at the WAN providers side of the communications facility.
|
DCE
Data Circuit Terminating Equipment |
|
|
These connect and allow communication between two networks and determine the best path for data to travel through the connected networks.
|
routers
|
|
|
Just as computers need operating systems to run software applications, routers need the ______ software to run configuration files.
|
Internetwork Operating System (IOS)
|
|
|
_______ files contain the instructions and parameters that control the flow of traffic in and out of the routers.
|
IOS configuration files
|
|
|
The ______ file specifies all the information for the correct setup and use of the selected, or enabled, routing and routed protocols on a router.
|
configuration
|
|
|
Routers use ______ to determine the best path for packets.
|
routing protocols
|
|
|
What is NVRAM?
|
nonvolatile random-access memory
|
|
|
This type of memory stores routing tables
|
RAM
|
|
|
This type of memory holds ARP cache
|
RAM
|
|
|
This type of memory holds fast-switching cache, performs packet buffering as shared RAM and maintains packet-hold queues
|
RAM
|
|
|
This type of memory provides temporary memory for the configuration file of a router while the router is powered on
|
RAM
|
|
|
This type of memory loses content when a router is powered down or restarted
|
RAM
|
|
|
This type of memory provides storage for the startup configuration file
|
NVRAM
|
|
|
This type of memory retains content when a router is powered down or restarted
|
NVRAM
|
|
|
This type of memory allows software to be updated without removing and replacing chips on the processor
|
flash
|
|
|
This type of memory retains content when a router is powered down or restarted and can store multiple versions of IOS software
|
flash
|
|
|
This type of memory holds the IOS image and is a type of electrically erasable programmable read-only memory (EEPROM)
|
flash
|
|
|
This type of memory maintains instructions for power-on self test (POST) diagnostics
|
ROM
|
|
|
This type of memory stores bootstrap program and basic operating system software
|
ROM
|
|
|
This type of memory requires replacing pluggable chips on the motherboard for software upgrades
|
ROM
|
|
|
These connect routers to a network for packet entry and exit and can be on the motherboard or on a separate module
|
interfaces
interface devices |
|
|
______ can be used to segment LANs, but they are mainly used as WAN devices.
|
Routers
|
|
|
_____ use WAN connections to communicate with each other.
|
Routers
|
(What devices?)
|
|
______ are the backbone devices of large intranets and of the Internet.
|
Routers
|
|
|
Routers operate at Layer ______ of the OSI model, making decisions based on network addresses.
|
3
network layer |
|
|
The two main functions of a ______ are to select the best path for packets and to route packets to the proper interface.
|
router
|
|
|
An administrator can configure ______ routes to maintain routing tables
|
static
|
|
|
Most routing tables are maintained dynamically through the use of a ______ that exchanges network topology information with other routers.
|
routing protocol
|
|
|
True or False: A correctly configured internetwork provides consistent end-to-end addressing.
|
true
|
|
|
The standards and protocols or primary functions of a WAN operate at the ______ layer and at the ______ layer.
|
physical
data link (layers 1 and 2) |
|
|
True or False: The Layer 1 and Layer 2 WAN standards and protocols are the same as the Layer 1 and Layer 2 LAN standards and protocols.
|
false
|
|
|
Generally, the ______ is the service provider and the DTE is the attached device.
|
DCE
|
|
|
The main function of a router is to transmit data using Layer ______ addresses.
|
3
(network layer) |
|
|
True or False: The main role of a router in a WAN is not to route.
|
true
|
|
|
True or false: The main role of a router in a WAN is to provide connections between the various WAN physical and data-link standards.
|
true
|
|
|
True or False: The main role of a router in a WAN is to route.
|
false
|
|
|
EIA/TIA-232 is a ______ layer standard.
|
physical
|
|
|
xDSL is a ______ layer standard.
|
physical
|
|
|
SONET (OC-3, OC-12, OC-48, OC-192) is a ______ layer standard.
|
physical
|
|
|
EIA-530 is a ______ layer standard.
|
physical
|
|
|
G.703 is a ______ layer standard.
|
physical
|
|
|
V.35 is a ______ layer standard.
|
physical
|
|
|
ISDN is a ______ layer standard.
|
physical
|
|
|
High-level data link control (HDLC) is a ______ layer standard.
|
data link
|
|
|
Frame Relay is a ______ layer standard.
|
data link
|
|
|
Point-to-Point Protocol (PPP) is a ______ layer standard.
|
data link
|
|
|
Synchronous Data Link Control (SDLC) is a ______ layer standard.
|
data link
|
|
|
Serial Line Internet Protocol (SLIP) is a ______ layer standard.
|
data link
|
|
|
X.25 is a ______ layer standard.
|
data link
|
|
|
ATM is a ______ layer standard.
|
data link
|
|
|
LAPB is a ______ layer standard.
|
data link
|
|
|
LAPF is a ______ layer standard.
|
data link
|
|
|
The _____ of a router executes instructions in the operating system.
|
Central Processing Unit (CPU)
|
|
|
True or false: Large routers may have multiple CPUs.
|
true
|
|
|
True or false: A router can have but one CPU.
|
false
|
|
|
In most routers the ______ provides run time space for executable Cisco IOS software and its subsystems.
|
RAM
|
(type of memory)
|
|
______ is usually logically divided into main processor memory and shared input/output (I/O) memory.
|
RAM
|
(type of memory)
|
|
Shared I/O memory is shared among ______ for temporary storage of packets.
|
interfaces
|
|
|
Shared I/O memory is shared among interfaces for temporary storage of ______.
|
packets
|
|
|
RAM is generally dynamic random-access memory (DRAM) and can be upgraded with the addition of ______.
|
dual in-line memory modules (DIMMs)
|
|
|
RAM is generally ______ random-access memory (DRAM) and can be upgraded with the addition of dual in-line memory modules (DIMMs).
|
dynamic
|
|
|
RAM is generally dynamic random-access memory (DRAM) and can be upgraded with the addition of ______(DIMMs).
|
dual in-line memory modules
|
|
|
In most routers an executable copy of the ______ is transferred to RAM during the boot process.
|
IOS
|
|
|
A flash single in-line memory module is known commonly as a ______.
|
SIMM
|
(acronym)
|
|
This type of memory is used to store the startup configuration.
|
NVRAM
|
|
|
The ______ is used to communicate between the CPU and the interfaces or expansion slots.
|
system bus
|
|
|
The system ______ is used to communicate between the CPU and the interfaces or expansion slots.
|
bus
|
|
|
ROM is used to permanently store the startup diagnostic code, which is called the ________.
|
ROM monitor
|
|
|
Some routers also have a scaled down version of the ______ on ROM that can be used as an alternative boot source.
|
IOS
|
|
|
The main tasks for ______ are hardware diagnostics during router bootup and loading the Cisco IOS software from flash to RAM.
|
ROM
|
|
|
The main tasks for ROM are ______ diagnostics during router bootup and loading the Cisco IOS software from flash to RAM.
|
hardware
|
|
|
The main tasks for ROM are hardware diagnostics during router bootup and loading the Cisco IOS software from ______ to RAM.
|
flash
flash memory |
|
|
The main tasks for ROM are hardware diagnostics during router bootup and loading the Cisco IOS software from flash to ______.
|
RAM
|
|
|
The ______ are the router connections to the outside.
|
interfaces
|
|
|
The three types of router interfaces are _____, WANs, and console or auxiliary (AUX).
|
LANs
|
|
|
The three types of router interfaces are LANs, WANs, and ______ or auxiliary (AUX).
|
console
|
|
|
The three types of router interfaces are LANs, WANs, and console or ______.
|
auxiliary (AUX)
|
|
|
The three types of ______ interfaces are LANs, WANs, and console or auxiliary (AUX).
|
router
|
|
|
The LAN interfaces have controller ______ that provide the logic for connecting the system to the media and may be a fixed configuration or modular.
|
chips
|
|
|
The LAN ______ have controller chips that provide the logic for connecting the system to the media and may be a fixed configuration or modular.
|
interfaces
|
|
|
The WAN interfaces include ______, ISDN, and integrated CSUs.
|
serial
|
|
|
The WAN interfaces include serial, ISDN, and integrated ______.
|
CSUs
|
|
|
The console and AUX ports are ______ ports that are used primarily for the initial configuration of a router.
|
serial
|
|
|
The ______ and AUX ports are serial ports that are used primarily for the initial configuration of a router.
|
console
|
|
|
The console and AUX ports are serial ports that are used primarily for the initial ______ of a router.
|
configuration
|
|
|
The console and ______ ports are serial ports that are used primarily for the initial configuration of a router.
|
AUX
|
|
|
True or False: A router's power supply is always external.
|
false
|
|
|
The three basic types of connections on a router, are LAN interfaces, WAN interfaces, and ______.
|
management ports
|
|
|
The three basic types of connections on a router, are LAN interfaces, ______ , and management ports
|
WAN interfaces
|
|
|
LAN interfaces allow routers to connect to the LAN media which is usually some form of ______ .
|
Ethernet
|
|
|
The LAN and WAN connections provide ______ connections through which packets are forwarded.
|
network
|
|
|
The LAN and WAN connections provide network connections through which ______ are forwarded.
|
packets
|
|
|
The ______ port provides a text-based connection for the configuration and troubleshooting of the router.
|
management
|
|
|
The ___________ provides a text-based connection for the configuration and troubleshooting of the router.
|
management port
|
|
|
The management port provides a ______ connection for the configuration and troubleshooting of the router.
|
text-based
|
|
|
The common management interfaces are the ______ and auxiliary ports.
|
console
|
|
|
The common management interfaces are the console and ______ ports.
|
auxiliary
|
|
|
True or False: All routers have an auxilliary port.
|
false
|
|
|
True or false: Asynchronous serial ports are not designed as networking ports.
|
false
|
|
|
True or false: Console and auxiliary (AUX) ports are asynchronous serial ports
|
true
|
|
|
True or false: Console and auxiliary (AUX) ports are synchronous serial ports
|
false
|
|
|
Console and auxiliary (AUX) ports are asynchronous ______ ports
|
serial
|
|
|
When the router is first put into service, there are no ______ parameters configured. Therefore the router cannot communicate with any network.
|
networking
|
|
|
After the initial ______ is entered into the router through the console or auxiliary port, the router can be connected to the network to troubleshoot or monitor it.
|
configuration
|
|
|
After the initial configuration is entered into the router through the ______ or ______ port, the router can be connected to the network to troubleshoot or monitor it.
|
console
auxiliary |
|
|
The console port displays router startup, ______, and error messages by default.
|
debugging
|
|
|
The console port displays ______ , debugging, and error messages by default.
|
router startup
|
|
|
The console port displays router startup, debugging, and ______ by default.
|
error messages
|
|
|
A ______ cable and an RJ-45 to DB-9 adapter are used to connect a PC to the console port.
|
rollover
|
|
|
A rollover cable and an ______ to DB-9 adapter are used to connect a PC to the console port.
|
RJ-45
|
|
|
A rollover cable and an RJ-45 to ______ adapter are used to connect a PC to the console port.
|
DB-9
|
|
|
A rollover cable and an RJ-45 to DB-9 adapter are used to connect a ______ to the console port.
|
PC
|
|
|
A rollover cable and an RJ-45 to DB-9 adapter are used to connect a PC to the _________.
|
console port
|
|
|
To connect to a console port, the PC or terminal must support ______ terminal emulation.
|
VT100
|
|
|
To connect to a ______ port, the PC or terminal must support VT100 terminal emulation.
|
console
|
|
|
To connect to a console port, the PC or terminal must support VT100 ______ emulation.
|
terminal
|
|
|
The following is the first step to connect a PC to a router:
Configure terminal emulation software on the PC for the following: The appropriate COM port 9600 baud ______ data bits No parity 1 stop bit No flow control |
8
|
|
|
The following is the first step to connect a PC to a router:
Configure terminal emulation software on the PC for the following: The appropriate COM port 9600 baud 8 data bits No parity ______ stop bits No flow control |
1
|
|
|
The following is the first step to connect a PC to a router:
Configure terminal emulation software on the PC for the following: The appropriate COM port ______ baud 8 data bits No parity 1 stop bit No flow control |
9600
|
|
|
The following are steps to connect a PC to a router:
Configure terminal emulation software Connect the RJ-45 connector of the rollover cable to the router console port. Connect the other end of the rollover cable to the RJ-45 to DB-9 adapter. Attach the female ______ adapter to a PC. |
DB-9
|
|
|
The following are steps to connect a PC to a router:
Configure terminal emulation software Connect the RJ-45 connector of the rollover cable to the router console port. Connect the other end of the rollover cable to the ______ to DB-9 adapter. Attach the female DB-9 adapter to a PC. |
RJ-45
|
|
|
The following are steps to connect a PC to a router:
Configure terminal emulation software Connect the RJ-45 connector of the ______ cable to the router console port. Connect the other end of the rollover cable to the RJ-45 to DB-9 adapter. Attach the female DB-9 adapter to a PC. |
rollover
|
|
|
This page will teach students how to connect LAN interfaces.
A router is usually connected to a LAN through an ______ or Fast Ethernet interface. |
Ethernet
|
|
|
The router is a ______ that communicates with the LAN through a hub or a switch.
|
host
|
|
|
The router is a host that communicates with the LAN through a ______ or a switch.
|
hub
|
|
|
The router is a host that communicates with the LAN through a hub or a ______.
|
switch
|
|
|
The router is a host that communicates with the LAN through a hub or a switch using a ______ cable.
|
straight-through
|
|
|
The router is a host that communicates with the LAN through a hub or a switch using a straight-through cable and generally requires ______ , or better, unshielded twisted-pair (UTP) cable
|
Category 5
Cat5 |
|
|
If the Ethernet connection of the router is connected directly to the computer or to another router a ______ cable is required.
|
crossover
|
|
|
Ethernet, ______, console, AUX, integrated CSU/DSU, and Token Ring interfaces use the same eight-pin connector, which is RJ-45
|
ISDN BRI
|
|
|
Ethernet, ISDN BRI, console, ______, integrated CSU/DSU, and Token Ring interfaces use the same eight-pin connector, which is RJ-45
|
AUX
|
|
|
Ethernet, ISDN BRI, console, AUX, integrated CSU/DSU, and Token Ring interfaces use the same ______ pin connector, which is RJ-45
|
eight
8 |
|
|
In Cisco's color code scheme to help distinguish the connections that are used on a router, yellow would indicate _________.
|
ethernet
|
|
|
In Cisco's color code scheme to help distinguish the connections that are used on a router, light green would indicate _________.
|
T1 or E1 network
|
|
|
In Cisco's color code scheme to help distinguish the connections that are used on a router, black would indicate _________.
|
modem
|
|
|
In Cisco's color code scheme to help distinguish the connections that are used on a router, orange would indicate _________.
|
ISDN network
|
|
|
In Cisco's color code scheme to help distinguish the connections that are used on a router, light blue would indicate _________.
|
computer COM port
|
|
|
In Cisco's color code scheme to help distinguish the connections that are used on a router, yellow would indicate an ethernet hub or switch and would use a _______ cable
|
straight through
|
|
|
In Cisco's color code scheme to help distinguish the connections that are used on a router, light blue would indicate a computer COM port and would use a _______ cable.
|
rollover
|
|
|
In Cisco's color code scheme to help distinguish the connections that are used on a router, black would indicate a modem and would use a _______ cable.
|
rollover
|
|
|
In Cisco's color code scheme to help distinguish the connections that are used on a router, orange would indicate an ISDN network and would use a _______ cable.
|
RJ-49
|
|
|
In Cisco's color code scheme to help distinguish the connections that are used on a router, purple would indicate a token ring device and would use a _______ cable.
|
RJ-45 token ring
|
|
|
For each type of WAN service, the customer premises equipment (CPE), which is often a router, is the ______.
|
DTE
|
|
|
For each type of WAN service, the customer premises equipment (CPE), which is often a ______, is the DTE.
|
router
|
|
|
For each type of WAN service, the customer premises equipment (CPE), which is often a router, is the DTE. This is connected to the service provider through a ______ device, which is commonly a modem or CSU/DSU.
|
DCE
|
|
|
For each type of WAN service, the customer premises equipment (CPE), which is often a router, is the DTE. This is connected to the service provider through a DCE device, which is commonly a ______ or CSU/DSU.
|
modem
|
|
|
Probably the most commonly used router interfaces for WAN services are ______ interfaces.
|
serial
|
|
|
The key difference between a DTE device and DCE device is that the ______ device provides the clock signal for the communications on the bus.
|
DCE
|
|