Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
the most common roof type is called ____ |
gable roof |
|
the tool used to lay out rafters is called a _____ A. speed square B. framing square C. rafter square D. all the above |
all the above |
|
if the slope for a roof is 8 on 12, the unit rise of a common rafter is _____ |
8 |
|
if the slop of a roof is 10 on 12, the unit run of a common rafter is _____ |
12 |
|
if the span of a building is 32' and the slope is 11 on 12, the total run is _____ |
16 |
|
two sloping roofs meeting at the top |
gable roof |
|
slops in one direction only |
shed roof |
|
slops upward from all walls of the building to the top |
hip roof |
|
a variation of the gable roof |
gambrel roof |
|
usually the width of the building |
span |
|
sloping member of the roof frame |
rafter |
|
horizontal travel of the rafter |
total run |
|
uppermost horizontal line of the roof |
ridge |
|
vertical distance that the rafter rises |
total rise |
|
gives no consideration to the thickness of the stock |
total span |
|
a fractional ratio of rise to span |
pitch |
|
inches of rise per foot of run |
slope of the roof |
|
vertical when the rafter is in position |
plumb line |
|
horizontal when the rafter is in position |
level line |
|
horizontal distance covered by the roof |
line length |