Electrician's Mate Navedtra 14344

What is the purpose of assigning an NEC to

EMs?

If you want to find advanced information on

field changes, you should refer to what

publication?

If you want to find information about new

developments in shipboard engineering, you

should refer to what publication?

To what publication should you refer for

information about the prevention of shipboard

accidents?

The Navy Electricity and Electronics Training

Series (NEETS) modules provide what type of

training?

Which of the following is a purpose of the

Electronics Installation and Maintenance Book

(EIMB)?

Which of the following publications will help

you in determining safe practices when

working with electrical and mechanical

equipment?

By observing proper safety precautions, you

will prevent which of the following situations?

Usually, what amount of current is fatal if it

passes through a person’s body for 1 second or

more?

Most shipboard deaths due to electrocution are

caused by shock received from what

voltage/source?

Final approval to work on an energized

switchboard is required from which of the

following persons?

Shipboard electrical systems are not considered

as a perfect ungrounded system. Which of the

following factors makes this statement correct?

When equipment grounding is provided, you

can make sure that the bonding surfaces will

have a positive metal-to-metal contact by

taking which of the following actions?

When using the safety shorting probe to

discharge a 30 μF capacitor, what is the

maximum safe voltage to discharge?

Before disconnecting a meter, what should you

do to the current transformer?

Most potential transformer primary windings

are protected by what types of devices?

To discharge capacitors in de-energized

equipment, which of the following devices is

used?

What is an acceptable resistance reading for

the ground connection between the ship’s hull

and the metal frame of a portable electric drill?

You are inspecting a portable electric drill, and

you notice the cord has exposed conductors.

What action should you take?

Which of the following is NOT an acceptable

procedure to follow when using a portable

electric drill?

What is the most delicate part of a piece of test

equipment?

The top surfaces of electric workbenches must

be insulated with what type of material?

A workbench must be secured to the deck.

All electrical workbench receptacles must be

supplied from a common or an isolation

transformer.

If you need to find information about the

approved deck coverings to use in your work

area, you should refer to what publication?

The dielectric feature of electrical rubber

gloves is based on what characteristic, if any,

of the glove?

When operating a deck buffer rated at 120

volts, what is the lowest class of rubber gloves

that you can safely wear?

To ensure maximum protection from floor

matting, you should take all EXCEPT which of

the following actions?

After reporting on board ship, at what point

should naval personnel become acquainted

with the types and locations of fire-fighting

equipment?

What is the safest type of fire-extinguishing

agent for you to use on an electrical fire?

During a fire, what person determines whether

the power should be secured?

When it becomes necessary to rig casualty

power cables, what person(s) is/are responsible

for tying the cables up in the overhead?

If a person is unconscious because of an

electric shock, you should start artificial

respiration at what point?

A person has just received an electrical shock

from an electric drill, and you cannot find the

switch or receptacle. What is the quickest and

safest method for you to use to free the victim?

A person has stopped breathing but is still

alive. This person is said to be in which of the

following states?

To prepare a victim quickly for administration

of mouth-to-mouth artificial respiration, you

should take which of the following steps?

Which of the following actions should NOT be

performed during the administration of

closed-chest massage?

When administering CPR to an adult, you

should depress the sternum what approximate

distance?

What type of wound has torn skin and tissue?

What measure is the last resort when trying to

control bleeding?

What method, if any, should you use to

indicate to medical personnel that a victim has

had a tourniquet applied?

Caused by chemical action on tissue.

A direct result of heat caused by the fire.

Caused by electrical current passing through

tissue.

Caused by exposure of the tissue to steam.

Burns of what degree are characterized by

blistering of the skin?

What percentage of a person is considered

burned when the burned area is confined to the

right leg?

When steam blisters cover half of a victim’s

back, (a) what percentage of (b) what class

burn exists?

When treating a victim with second or third

degree burns, you should treat for what

symptom first?

Personnel that work in noise-hazardous areas

with a noise level of 84 dB and above are

required to have a hearing test within what

specified period of time after reporting aboard

ship?

At what minimum decibel level is double

hearing protection required?

Heat stress is caused by the body trying to

regulate its temperature. Which of the

following is/are cause(s) of heat stress?

Which of the following is NOT a cause of heat

stress?

A heat stress survey is required in any space

when the ambient temperature reaches or

exceeds what minimum temperature?

The reason for conducting a heat survey of a

space is to

Of the following items, which one is NOT

considered a hazardous item?

You can prevent an injury if you regard all

aerosols as presenting what hazard?

Electrical equipment should be painted only

when the lack of paint will cause what

condition?

Which of the following actions should NOT be

taken to prevent corrosion?

What are the two types of insulating varnish?

When the use of water-based solvent is not

practical, what cleaner is recommended?

What action should you take when using

cleaning solvents in a confined space?

You should NOT use which of the following

types of material to clean electrical contacts?

Of the factors listed below, which one(s)

cause(s) cathode-ray tubes (CRTs) to be

classified as a hazardous material?

Of the following materials, which one is NOT

a hazardous material released when the glass

envelope of a CRT is broken?

If you cannot return a CRT to the manufacturer

for disposal, what action should you take?

Which of the following phrases is NOT

allowed when a caution tag is used?

What publication contains an explanation of

the steps required to tag out a piece of

equipment?

Red tags are used when all EXCEPT which of

the following conditions exists?

When two or more repair groups are

performing repairs on a system, the

responsibility for posting a red tag rests with

What function is derived from the manner in

which the engineering department is

organized?

Which of the following is/are the purpose(s) of

the National Apprenticeship Standards of the

U. S. Navy?