• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/20

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

20 Cards in this Set

  • Front
  • Back

Removal of an engine and replacing it with a new or overhauled engine is classified as a


Minor Repair

A certified A&P may delegate their inspection duties for a 100 hour inspection



False

An aircraft Annual inspection is due. While the pilot is flying his aircraft the total time is 1450.5 hours. When he lands his aircraft total time is 1453.0 hours. The annual inspection is done at 1453.0 hours. When is his next annual inspection due?

In 12 calenders months

An aircraft 100 hour inspection is due at 1560 hours. While the pilot is flying his aircraft the total time is 1560 hours. When he lands his aircraft total time is 1562 hours. The 100 hour inspection is done at 1562. When is his next 100 hour inspection



1660 hours

Which block of the FAA form 337 do you as a A&P mechanic sign to prove your conformity to part 43 upon the completion of work performed?

6

14 CFR part 65 is


Certification: Airman other than flight crew members

14 CFR part 91 is:

General operating flight rules

14 CFR part 43 is

Maintenance: preventative maintenance, rebuilding, and alteration

Who first decides if a Repair or Alteration is major or minor

A&P mechanic performing the work

After a minor repair or minor Alteration and the A&P mechanic has entered the information in the records, what constitutes return to service?

Mechanics signature

What part of FARs prescribes the requirements for issuing mechanics certificates and associated ratings Also, the general operating rules for the holders of these certificates and ratings

Part 65

What regulation authorizes a certificated mechanic who holds IA to approve or dissaprove a major Repair or Alteration

14 CFR part 43

Repair of a control surface is classified as a

Major repair

The classification of items that constitute major and minor repair and major and minor alterations are found where?

FAR 43 appendix A

Approval for return to service on a Form 337, block 7 is signed by a(n)

A&P mechanic with an IA

An A&P mechanic can perform a rebuild of a propeller

Flase

What FAR requires a mechanic to use a checklist while performing a 100/Annual inspection?

FAR 43

Scope and Detail of items (as applicable to the particular aircraft) to be included in Annual and 100-hour inspection is in

14 CFR part 43 Appendix D

An FAA form 337 is used to record and document which of the following

Major repairs and major Alterations

On an aircraft maintenance record entry is it required to give reference to the sources where the information to perform the maintenance was found?

No