Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
12 Cards in this Set
- Front
- Back
What is DIRECT RADIATOR |
When the cone pushes straight out into the air without going through the horn |
|
What does high pass filter remove and prevent |
It removes very low frequencies (Below audible range) and prevents wasteful use of amp power |
|
In some small sound systems the power amp may be built into the mixer true or false |
True |
|
What are two ways to tell if the system has overloaded |
Temperature sensitive switches and led light on front of panel |
|
What can cause overheating |
Poor ventilation, high current demands on power transistors, short circuits across speaker terminals To much gray build up can cause damage to transistors |
|
Why might u not want to use a fan as a cooling system |
Fans can be noisy and potentially not suitable for studio installation |
|
Why might u want to use heat sinks for cooling |
Passive noiseless cooling system |
|
What is input sensitivity |
A measurement of how much input voltage is required to drive the amp at full output power |
|
The lower the voltage required for full output the greater the what |
Sensitivity |
|
Speakers on floor are known as |
Stage monitors or floor wedges |
|
Why would u use in ear monitors |
Less stage noise, isolating, smaller portable |
|
What would u use to send individual mixes during live show |
Q sends |