Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
The basic mechanism for chip formation is by shearing.
[TRUE or FALSE]? |
TRUE
|
|
A built-up edge (BUE) consists in layers of material from the workpiece that gradually are deposited on the tool tip.
[TRUE or FALSE]? |
TRUE
|
|
The tendency for BUE formation can be reduce by the following means:
|
Increase the rake angle
|
|
Grooves in the cutting tools cannot act as chip breakers
[TRUE or FALSE]? |
FALSE
|
|
Using Taylor for tool life and letting n=0.5 and C=400, calculate the percentage of the increase in tool life when the cutting speed is reduced by 50%
|
300%
|
|
Metal Carbides are harder than Ceramics
[TRUE or FALSE]? |
FALSE
|
|
For machining steel and cast iron, the diamond is the recommended tool.
[TRUE or FALSE]? |
FALSE
|
|
A machining operation is being carried out with a cutting fluid that is an effective lubricant. What will be changes in the mechanics of the cutting operation if the fluid is shut off?
|
The chip will become thicker
|
|
Diamond tools work very well at high temperature (higher than 1000 Celsius)
[TRUE or FALSE]? |
FALSE
|
|
Assume that, in orthogonal cutting, the rake angle is 15 and the coefficient of friction is 0.2. Using the equations:
to/tc=sin/cos(-α); =45°+ α/2 - ß/2; µ=tan ß |
>> 16%
α = rake angle = shear angle ß = friction angle µ = coefficient of friction t0 = depth of cut tc = chip thickness to/ tc = cutting ratio or chip-thickness ratio α = 15° = 45° + 15/2 – 11.3099/2 = 46.85° to/ tc =sin (46.85)/cos (46.85-15) = 86% to/ tc =sin (41.6)/cos (41.6-15) = 74% (0.2) = ß 11.3099 = ß 2 µ = tan ß (0.2) = ß 21.8° = ß = 41.6° |