• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/23

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

23 Cards in this Set

  • Front
  • Back

DME Frequency

UHF, 960 - 1215 MHz

Delay at ground transponder of DME station

50 microseconds

What does the dme transponder reply frequency differ by

63Mhz

What is the interrogator in DME

Aircraft

Echo protection circuit in DMe

A filter to make sure only your interrogation pulse are received

DME ident ...when?

Once every 40 seconds.... the higher frequency

Accuracy of a DME

+/- 0.25nm + 1.25%

Total system error of Dme after 1989

0.2nm max

If Dme signal is interrupted

The system enters memory mode for 10 seconds

VOR And DmE co located ident

Share the same ident

AWR, frequency and wavelength?

9 GHz and 3cm

SSR use what frequency ?

UHF

SSR use what frequency ?

UHF

The ground based interrogated of a SSR sends what signal?

Sends on 1030 MHz

SSR transponder, replies on what signal ?

1090mhz

For SSR, when P2 signal is received is higher than P1 and P2 then

You are receiving sidelobes

NDB Frequency

190 kHz - 1750 KHz

Outer marker of ILS, colour and Frequncy

400 hz blue

Middle marker ILS , colour and frequency

Amber, 1300 hz

Inner marker ILS, colour and frequency

White, 3000 hz

DME Range is

Line of sight

Mode S receives long P4 pulse from an interrogator....

Means interrogator is transmitting a mode A/C/S all call

What determines the minimum and maximum unambiguous range of primary radar?

Minimum = Pulse Length


Max range = pulse repetition frequency