Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
12 Cards in this Set
- Front
- Back
|
What is the function of the automatic adjuster assembly on the segmented rotor brake assembly? |
Compensate for lining wear and will maintain a uniform running clearance at all times, also it will give a visual indication of brake lining wear |
|
|
How is brake linings wear determined on the segmented rotor brake assembly? |
As brake linings wear, the adjuster pins are pulled further and further through the adjuster clamp, this will give a visual indication of brake lining wear. |
|
|
What are the adjustment procedures of the automatic adjuster of the segmented rotor brake assembly? |
tighten the adjusting nuts until the spacer bottoms against the pressure plate then unscrew the adjusting nuts the prescribed number of turns |
|
|
The stator plates? |
are flat plates with brake linings on both sides |
|
|
The carrier? |
is the basic unit on which the other components are assembled |
|
|
The brake linings are? |
separated multiple blocks that help dissipate the heat |
|
|
the rotor segment assembly? |
is the only rotating part of the brake assembly
|
|
|
the backing plate? |
is a stationary unit that stops all lateral movement |
|
|
the shim? |
holds the backing plate a set distance from the carrier |
|
|
the stator drive sleeves? |
the non rotating parts of the brake assembly |
|
|
the pressure plate assembly ? |
receives the force of the piston and brake linings are riveted to one side |
|
|
the piston and cup packing? |
is installed on the groove of the cylinder with the lips inward |
