Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
35 Cards in this Set
- Front
- Back
Use authorized symbols or abbreviations for recording what three items?
|
Clearances, Reports, Instructions
|
|
Referring to your clearance abbreviations, what is the meaning of ‘Z’?
|
Tower jurisdiction
|
|
Referring to your miscellaneous abbreviations, what does the abbreviation ‘RX’ stand for?
|
Report crossing
|
|
Referring to the control symbol chart, the following symbol stands for
A. maintain. B. moving eastbound. C. maximum forward speed. |
maintain
|
|
To delete any unused or unwanted symbols or items a/an ________ or ________ should be used.
A. /; O B. X; ? C. 0; X |
X; -
|
|
Flight progress strips are only used as an aid and are NOT a legal document.
A. True B. False |
False
|
|
Strips are ________ and ________ differently for each air traffic option.
|
sized and formatted
|
|
The Terminal strip has three different uses including:
A. Preflight, Overflight, and Arrival. B. Departure, Arrival, and Overflight. C. Departure, Arrival, and Approach. |
Departure, Arrival, and Overflight
|
|
In comparison to the Terminal strip, the En Route strip is
A. larger with more blocks. B. smaller with less blocks. C. no different in size. |
larger with more blocks
|
|
For an En Route Strip, in which block does the aircraft type appear?
|
Block 4
|
|
When you have run out of writing space on a strip for a particular flight, you should
A. use a note pad and record any additional information on that flight. B. use additional strips to record information and consider all strips as one. C. erase the least important information and continue to record the most current information on the same strip. |
use additional strips to record information and consider all strips as one
|
|
On a Flight Service flight progress strip, in which block is the departure point information recorded ?
|
Block 4
|
|
Strips are considered legal documents.
A. True B. False |
True
|
|
Which of the items listed below is NOT one of the three designations for a Terminal strip?
A. Preflight B. Departure C. Overflight D. Arrival |
Preflight
|
|
On all Terminal strips, Block 5 is used for what purpose?
A. Aircraft I.D. B. Aircraft type C. Computer I.D. D. Beacon code |
Beacon code
|
|
For Terminal arrival strips, altitude information is found in which block?
A. 6 B. 7 C. 8 D. 9 |
9
|
|
In which block would you find the destination airport on a Terminal arrival strip?
A. 2A B. 8A C. 9A D. 18 |
9A
|
|
The proposed departure time on a Terminal departure strip can be found in which block?
A. 4 B. 6 C. 8 D. 9 |
6
|
|
For the Terminal departure strip, Block 7 is used for what?
A. Computer I.D. B. Requested altitude C. Departure airport D. Filed flight plan route |
Requested altitude
|
|
On a Terminal overflight strip, altitude and route of flight can be found in which block?
A. 3 B. 5 C. 7 D. 9 |
9
|
|
In which block can the aircraft I.D. be found on an En Route strip?
A. 1 B. 3 C. 11 D. 13 |
3
|
|
What information is found in Block 5 of the En Route strip?
A. Revision number B. Aircraft type C. Filed true airspeed D. Strip number |
Filed true airspeed
|
|
Which block is used to record the aircraft I.D. on a Flight Service strip?
A. 1 B. 3 C. 5 D. 7 |
1
|
|
What needs to be added to the letter ‘S’ when hand printed?
A. A box around the letter B. A circle around the letter C. A horizontal line above the letter D. A horizontal line below the letter |
A horizontal line below the letter
|
|
The letters ‘OTP’ on a strip stand for
A. VFR conditions-on-top. B. oceanic transfer point. C. vectors above. D. vectors around. |
VFR conditions-on-top.
|
|
What symbol should be used to delete any unwanted or unused altitude information?
A. X B. ? C. + D. / |
X
|
|
Which control symbol indicates that flight information has been forwarded?
A. Slash B. Red circle C. Check mark D. B and C |
B and C
|
|
When stripmarking, do NOT draw a horizontal line through
A. unused symbols. B. a past frequency the aircraft used. C. call sign. D. an altitude until the aircraft has reported leaving the altitude. |
an altitude until the aircraft has reported leaving the altitude
|
|
Flight progress strips are used for
A. traffic count only. B. traffic sequencing only. C. posting current data on air traffic. D. traffic metering. |
posting current data on air traffic
|
|
In any option, strips are produced on either special ________ or they are ________.
|
printers; handwritten
|
|
Compared to the Terminal strip, the En Route strip is ________ and has 12 more ________.
|
larger, blocks
|
|
The Flight Service option has ________ designations for their strips.
|
two
|
|
Compared to Terminal or En Route strips, Flight Service strips are ________ yet have ________ blocks.
|
larger, fewer
|
|
Use authorized symbols or abbreviations for recording ________, ________, and ________.
|
clearances, reports, instructions
|
|
What is the symbol to indicate that an aircraft’s clearance is void if NOT airborne by a specific time?
A. V~ B. ~< C. v< D. V |
v<
|