Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
Describe and explain the principles of operation of SAW |
Metals are joined by using an electric arc established between a continously fed BARE METAL CONSUMABLE electrode or electrodes and the work . Shielding gas is provided by a granular, fusible Flux material usually brought to the work area using a Flux feed system |
|
Whay positions can SAW be used in |
Flat and horizontal |
|
Name 4 types of materials that saw can be used on ? |
Carbon Alloy steels Stainless steel Nickel alloys |
|
Whay are the advantages of using a screw-type work clamp with a SAW |
-provides a strong and positive contact to the work -minimizes heat buildup |
|
Whay type of output slope do a SAW power sources use? |
Constant current (CC) constant voltage (CV) |
|
Whatn is the recommended duty cycle for SAW power source ? |
100% |
|
SAW may be used in the semi-automatic or automatic operation modes? True or false |
True |
|
What is the advantage of using an AC power source for SAW |
It minimizes arc blow with multiple wire setups |
|
What will usually results if the drive roll pressure is set too low? |
The wire electrode will slip and feed erratically |
|
How will the arc react if the Flux mayer is too shallow? |
The weld will be flashing and will likely result in porosity |
|
Which is helix? |
The space between two unrestrained loops of wire? |
|
Wht types of drives roll system are normally used with SAW? |
Knurled or V-GROOVED |
|
What type of wire feed set up is used with CV power sources ? |
Constant speed? |
|
To increase arc length when you are SAW welding you would? |
Increase arc voltage |
|
When using SAW, an increase in arc voltages produce ? |
Wider arc stream, and shallower penetration |
|
When is DCEN used with SAW |
When shallower penetration is required |
|
What diameters are SAW electrode wires availible in? |
1/16"--- 1/4" |
|
Why type of Flux can be reused ? |
Fused flux |
|
Which type of SAW flux generally used for additional of allotting elements? |
Active flux |
|
What should be done with SAW FLUXES after they have become exposed to moisture |
They should be dried or re baked according to manufacturer specifications |