Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
26 Cards in this Set
- Front
- Back
chemical or substance applied in finishing carpentry |
Finishing Materials |
|
metal supplies used in furniture |
Hardware |
|
he accounting of tools and materials |
Inventory |
|
refers to the indicated name of tools and equipment |
Label |
|
oils or grease which is use to help the machine to run smoothly |
Lubricants |
|
the act or art of measuring |
Mensuration |
|
the bounding line or curve of a plain area |
Perimeter |
|
handy machines operated by current/electricity |
Power tools |
|
marked for use in measurement |
Scaler |
|
set aside things from the others |
Segregate |
|
serves as a measure of reference |
Standard |
|
refers to a lumber for a certain carpentry job |
stock |
|
to put tools and materials in their proper places |
Store |
|
wood to be cut in a cutting machine |
Substrate |
|
what are the measuring tools? |
Pull-Push Rule RulerMeter Stick Try Square Caliper |
|
what are the marking lining tools? |
Pencil Marking gauge Chalk line Divider Compass |
|
what are the testing tools? |
Try square Steel square Spirit Level Plumb-bob |
|
what are the edge cutting tools? |
plane chisel spoke shave cabinet scraper |
|
what are the tooth cutting tools? |
Cross cut saw Rip saw Back saw Compass saw Turning saw Coping saw Dovetail saw |
|
what are the boring tools? |
Auger bit Expansive bit Drill bit |
|
what are the holding tools? |
C-clamp Bench vise Bar clamp |
|
what are the Miscellanous tools? |
Oil stone File Paint brush Nail set Saw set |
|
what are the Portable Power tools? |
Sander Router Jigsaw Circular saw Electric Drill |
|
what are the PPE? |
Goggles Ear protector Face mask Gloves Apron |
|
What are the driving tools? |
Claw hammer Mallet Nail set Screw driver |
|
how to lubricate tools and equipment? |
1. Read and analyze the use of preventive Maintenance Schedule form. 2. Determine the types of tools and machine needed to be lubricated. 3. Fill out a requisition slip form in releasing the lubricants needed. 4. Secure a borrower’s slip from your teacher. 5. Fill out the slip form correctly intended for the needed tools. 6. Perform the task according to the prescribed schedule and the assigned machine. 7. Perform lubricating procedure. 8. Determine the parts of the machine needed to be lubricated. 9. Apply thin coat of oil on the parts for a long period of time. 10. Open the bearing cover and apply grease. 11. Apply grease on sealed bearing with the use of a grease gun. |