Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
100 Cards in this Set
- Front
- Back
Trainging detachments are admininstratively assigned to which MAJCOM?
|
Air Education and Trainging Command (AETC)
|
|
Air Education and Training Command training detachments normally do NOT provide what type of training?
|
Ancillary Training
|
|
The block training method is normally used to teach what Maintenance Training Flight trainging course?
|
Maintenance Orientation
|
|
Each airframe and powerplant (A&P) specialized course must be completed within how many months?
|
13 Months
|
|
What is used as a cover folder for an individual's training record?
|
AF Form 623, Individual Training Record
|
|
Who can designate critical tasks that apply to a specific Air Force Specialty Code (AFSC) in a particular work center?
|
-MAJCOMs
-Supervisors -Commanders |
|
Who must approve a waiver before an individual can be added to the special certification roster (SCR) for a task normally performed by a person of a higher grade?
|
Maintenance Group commander (MXG/CC)
|
|
In order to be given authority to downgrade a "Red-X" an individual must be approved by the maintenance group commander (MXG/CC) and hold the minimum grade of...
|
Master Sergeant (MSgt)
|
|
What training phase has these four sub-phases: multiphase, MAJCOM mandatory, freeflow, and maintenance qualification training?
|
Phase II
|
|
What continuation training consists of academic and practical hands-on courses that complement intial skills trainning received through AETC mission ready airman (MRA) and training detachment(TD) courses?
|
Maintenance qualification
|
|
How often does the maintenance training flight (MTF) provide a status of training (SOT) briefing to the maintenance group commander (MXG/CC)?
|
Monthly
|
|
An individual comes due for a training recertification while TDY, on leave, or incapacitated. Provided it has not been more than 60 days since the original due date, how many days are allowed after returning before decertification is required?
|
30 days
|
|
Who is responsible for conducting an interview with both the trainee and his/her supervisor before a trainee starts a career development course(CDC)?
|
Unit training manager
|
|
Once you have completed the master task list for your master training plan, your next step is to
|
determine training needs
|
|
In order to account for unfunded requirements and valid non-maintenance tasks, the logistics composite model (LCOM) allows what percentage of overhead manning?
|
10 percent
|
|
What element of a logistics composite model (LCOM) study considers weather modeling conditions?
|
Operations requirements
|
|
What factors are modeled in a logistics composite model (LCOM) manpower study?
|
-Spare parts
-Maintenance people -Aeorspace ground equipment |
|
Manpower authorizations are...
|
Funded
|
|
A unit manpower document (UDM) does what?
|
-Show the AF specialty code required for a particular position
-Provide detailed information about each manpower requirement -Show the required grade for particular positions |
|
A meeting to discuss manning issues in the maintenance group is normally held on a ________ basis?
|
Monthly
|
|
What maintenance group office acts as the office of primary responsibility for maintenance analysis referrals?
|
Maintenance data system analysis (MDSA)
|
|
What agency is normally responsible for monitoring the overall maintenance supply interface and resolving supply support problems?
|
Maintenance supply liaison
|
|
What are some of the Maintenance supply liaison's duties?
|
-Monitoring the status of back-ordered requisitions
-Advising supervisors on supply management documents -Soliciting and consolidating inputs to initiate a quick reference list |
|
The assets in a high priority mission support kit (HPMSK) should be transferred into the host base's Standard Base Supply System account after how many days?
|
30 Days
|
|
How often are operating commands required to review permanent readiness spares packages (RSPs)?
|
Annually
|
|
What expendability, recoverability, and reparability codes (ERRC) must be assigned to an asset before it can be placed on a bench stock?
|
XB3
|
|
Shop stock should not exceed how many days of usage?
|
90 days
|
|
Provided it is still serviceable, you are allowed to inspect and re-mark with a new expiration date wich type of shelf life item?
|
Cat II
|
|
What are obvious signs of pollution?
|
-Oil sheen on standing water
-Stressed vegetation -Stains on ground |
|
Who is responsible for developing a hazard communication (HAZCOM) training plan to notify personnel of all known hazards they may be exposed to in a particular workcenter?
|
Section supervisor
|
|
In the Maintenance Group, who is responsible for establishing procedures and controls for the local manufacture of tools, parts and other items as required by technical guidance?
|
MXG Commander
|
|
Who in the maintenance group is responsible for ensuring the capability exists to meet local manufacture requirements?
|
Maintenance Squadtron Operations Officer/Maintenance Superintendent
|
|
Who must appoint an individual to be an equipment account custodian?
|
Squadron Commander
|
|
An individual must receive what specific block of supply training before assuming duties as a due-in from maintenance (DIFM) monitor?
|
IIB
|
|
What is covered under the Precious Metals Recovery Program? which is not?
|
Covered: Silver, Iridium, Rhodium
Not coverd: Copper |
|
What Precious Metals Indicator Code (PMIC) indicates that an item of supply does not contain precious metal?
|
Code A
|
|
What Precious Metals Indicator Code indicates that an item of supply contains a combination of two or more precious metals?
|
Code C
|
|
What supply tracking document provides information on all document numbers processed during the day?
|
D04, Daily Document Register
|
|
What supply tracking document is produced daily and lists all back-ordered parts with an urgency of need (UND) code of A?
|
D18, Priority Monitor Report
|
|
What supply tracking document provides a management product for monitoring issue and bench stock supply support?
|
M-24, Organization Effectiveness Report
|
|
What Logistics Readiness Squadron (LRS) office accounts for special purpose recoverable authorized maintenance (SPRAM) assets managed on in-use detail records?
|
Equipment Liaison Office (ELO)
|
|
What is the special purpose recoverable authorized maintenance (SPRAM) flag code for stand-alone spares?
|
Code A
|
|
What is the special purpose recoverable authorized maintenance (SPRAM) flag code for fault isolation spares?
|
Code F
|
|
Who is the final authority for reviewing a unit's list of supply assets requiring functional check, calibration, or operational flight programming?
|
Logistics Readiness Squadron (LRS) Chief Inspector
|
|
Who is in the review chain for items listed as supply assets requiring locally performed functional check, calibration, or operational flight programming?
|
-Operations Officer/maintenance superintendent
-Logistics Readiness Squadron -Flight commander/Chief |
|
Who ultimately determines if the security provided at a transient location is adequate for classified assets installed on an aircraft?
|
Aircraft Commander
|
|
Who is responsible for the immediate security of classified equipement installed on an aircraft after it makes an emergency landing?
|
Aircraft Commander
|
|
When the aircraft owner or user does not stay with their aircraft, he/she must arrange for security checks to be accomplished every..
|
3 hours
|
|
What supply delivery priotiry is appropriate for primary mission aircraft 13 hours after landing?
|
priority 3
|
|
What supply delivery priority is appropriate for bench stock requirements?
|
priority 5
|
|
What urgency justification codes (UJCs) are used to show a supply request for bits and pieces to repair a line replaceable unit (LRU) or shop replaceable unit (SRU) spare?
|
Codes AR or BR
|
|
Before a supply point can be established and located in a maintenance work area, who must maintenance coordinate with?
|
LRS material management element
|
|
What is the accountability document used for supply points that shows the quantity authroized, on-hand, and due-out?
|
Supply Point Listing
|
|
When a mission capable (MICAP) part issues and is placed in the tail number bin (TNB), supply personnel notify the
|
Maintenance Operations Center (MOC)
|
|
When a back-ordered item issues and is placed in the tail number bin (TNB), supply personnel notify the...
|
Aircraft Maintenance Unit's (AMU's) Plans, Scheduling, and Documentation (PS&D) section
|
|
When items are placed in a aircraft's tail number bin (TNB), what entry is not normally needed?
|
Security classification
|
|
When the goal is to get a refund or a new item in exchange, what type of deficiency report is submitted?
|
Supply Discrepancy Report
|
|
Who has the responsibility for overall Deficiency Report program management for the submitting organization or group?
|
Originating Point
|
|
Who acts as the Deficiency Report focal point between the support point and submitting organization?
|
Action Point
|
|
Units cannot make local modifications to what type of AF publications?
|
Technical Orders
|
|
Who is responsible for establishing a maintenace group technical order custodian to administer TO requirements in support of assigned group missions and activities?
|
MXG Commander
|
|
What are some of the Maintenance Group technical order distribution office duties?
|
-Assisting units in establishing additional TODO accounts
-Advising MXG/CC on TO availability -Resolving TO availability problems |
|
The product improvement Manger is usually assigned to what maintenance group section?
|
Quality Assurance (QA)
|
|
What are the technical order change priorities?
|
-Urgent
-Routine -Emergency |
|
An improvement that identifies a replacement for hazardous materials or an ozone depletiong substance would be submitted as what technical order change priority?
|
Urgent
|
|
Who is the final approval authority for waivers of technical order system policies and procedures?
|
HQ/USAF/A4MM
|
|
What are some of the approved communication methods used for issuing approved technical order waivers or deviations?
|
-Signed letter
-Organizational e-mail -Defense Message System |
|
If a serially controlled iteam is cannabalized (CANN), who is the CANN authority required to notify?
|
Plans, scheduling, and documentation (PS&D)
|
|
For a unit using the extended cannibalization cycle, the standard time frame for having an aircraft down is...
|
45-60 days
|
|
How are radiographic inspections accomplished outside the Non destructive Inspections Laboratory calssified?
|
Unshielded
|
|
When calibrating navigational equipment, an external power unit is attached while towing and aircraft during what type of operation?
|
Compass rose
|
|
"Red Ball" maintenance defines a situation that requires what?
|
-priority actions
-a sense of urgency -specific local procedures |
|
During "Red Ball" maintenance it is important that expediters have a quick reference list (QRL) available in order to...
|
reduce the time needed to research parts
|
|
What are some of the members of the Joint Council on Aging Aircraft?
|
-US Army
-US Air Force -Federal Aviation Administration (FAA) |
|
Who appoints an officer or NCO as the maintenance group Aircraft Structural Integrity Program (ASIP) project officer?
|
MXG Commander
|
|
What aircraft Maintenance Unit (AMU) section is required to ensure Aircraft Structural Integrity Program (ASIP) equipped aircraft are identified as such in weekly schedules?
|
Plans, Scheduling, and Documentation (PS&D)
|
|
Who is the office of primary responsibility (OPR) for deveolpment of wing procedures for control and management of tools/equipment used on the flight line and in aerospace maintenance industrial areas?
|
Maintenance Group Commander
|
|
In addition to daily accountability checks, how often must support personnel conduct and document a maintenance group commander standardized inspection of all support section tools and equipment?
|
Annually
|
|
How many digits make up an equipment identification designator (EID) code used to identify tools and equipment?
|
9 digits
|
|
In the equipment identification designator (EID) code U6JG00001, what does the third character "J" identify?
|
the unit its assigned to
|
|
Without a waiver, what is the minimum position an individual must hold before clearing a red X for a lost tool that has NOT been found?
|
Operations Officer or Maintenance superintendent
|
|
Who is the Quality Assurance (QA) chief inspector directly responsible to for ensuring the required Maintenance Standardization and Evaluation Program (MSEP) functions are performed?
|
Quality Assurance (QA) Officer In Charge (OIC)/Superintendent (SUPT)
|
|
Personnel should normally be assigned to a unit for how many months before being selected as Quality Assurance(QA) inspectors?
|
6 months
|
|
What maintenance standardization and evaluation team individual assessment finding is defined as a condition that would endanger personnel or jeopardize equipment?
|
Major
|
|
What maintenance standardization and evaluation team individual assessment is performed after a technician completes a task?
|
Quality Verificiation Inspection
|
|
The Wing foreign object damage (FOD) monitor is normally located within the...
|
Quality Assurance section (QA)
|
|
The wing foreign object damage monitor must notify the MAJCOM FOD manager within how many hours of a FOD incident?
|
24 hours
|
|
What dollar amount of damage must be exceeded for a foreign object damage (FOD) incident to be used to calculate the FOD rate for a unit?
|
$20,000
|
|
What time-frame is used for determining whether an item that falls off an aircraft is considered a reportable dropped object?
|
Engine start to engine shut down
|
|
A dropped object that has resulted in casualties or property damage must be reported IAW..
|
AFI 10-206, Operational Reporting
|
|
What AF publication provides general guidance for executing an effective maintenance recovery operation?
|
AFI 21-101, Aircraft and equipment maintenance management
|
|
The maximum total initial duty time (including home station duty, travel time, and recovery site duty upon arrival) that a maintenance recovery team member may be worked before being given 8 hours of uninterrupted rest is...
|
16 hours of duty
|
|
What maintenance squadron flight is the office of primary responsibility for the maintenance group's crashed, damaged, or disabled Aircraft Recovery (CDDAR) Program operating instruction?
|
Maintenance Flight
|
|
How often must the Team Chief for the Crashed, Damaged, or Disabled Aircraft Recovery (CDDAR) Program conduct a CDDAR exercise?
|
Annually
|
|
After initial training, how often must Crashed, Damaged, or Disabled Aircraft Recovery (CDDAR) Team members receive additional academic and hands-on training?
|
Annually
|
|
What AF Portal link provides access to recurring AF peridocials like Airman Magazine and the Air & Space Journal?
|
AF Elcetronic Publishing (AF e-Publishing)
|
|
What AF Portal link can be used to access user manuals for various AF computer systems?
|
AF Center for Electronic Distribution of Systems (AFCEDS)
|
|
Who is responsible for coordinating the number of certified load crew team members in support of aircraft generation planning?
|
Wing Weapons Manager
|
|
You are primarily concerend with answering the question: "What steps need to be taken?" during which aircraft generation planning area?
|
Aircraft generation actions
|
|
You are primarily concerned with answering the question: "How long does each step or group of steps take?" during which aircraft generation planning area?
|
Aircraft generation action timing
|