Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
3 Cards in this Set
- Front
- Back
ACCT 505 Week 2 Quiz Job Order and Process Costing Systems |
ACCT 505 Week 2 Quiz Job Order and Process Costing Systems (DEVRY) 1. Question : (TCO F) For which situation(s) below would an organization be more likely to use a job-order costing system of accumulating product costs rather than a process costing system? 2. Question : (TCO F) Process costing would be appropriate for each of the following except: 3. Question : (TCO F) Lucas Company uses the weighted-average method in its process costing system. The company adds materials at the beginning of the process in the Forming Department, which is the first of two stages in its production process. Information concerning operations in the Forming Department in October follows: Units Material Cost Work in process on October 1 6,000 $3,000 Units started in October 50,000 $25,560 Units completed and transferred to next Department during October 44,000
4. Question : (TCO F) In a job-order costing system, the use of direct materials that have been previously purchased is recorded as a debit to: 5. Question : (TCO F) During December at Ingrim Corporation, $74,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $6,000. The journal entry to record the requisition from the storeroom would include a: 6. Question : (TCO F) Valles Corporation had $22,000 of raw materials on hand on February 1. During the month, the company purchased an additional $75,000 of raw materials. The journal entry to record the purchase of raw materials would include a: 1. Question : (TCO F) Whether a company uses process costing or job-order costing depends on its industry. A number of companies in different industries are listed below: i. Brick manufacturer Process Costing ii. Contract printer that produces posters, books, and pamphlets to order Job Order Costing iii. Natural gas production company Process Costing iv. Dairy farm Process Costing v. Coal mining company Process Costing vi. Specialty coffee roaster (roasts small batches of specialty coffee beans) Job Order Costing 2. Question : (TCO F) Job 484 was recently completed. The following data have been recorded on its job cost sheet: Direct materials $57,240 Direct labor hours 1,692 DLHs Direct labor wage rate $12 per DLHS Number of units completed 3,600 units
3. Question : (TCO F) Miller Company manufactures a product for which materials are added at the beginning of the manufacturing process. A review of the company's inventory and cost records for the most recently completed year revealed the following information: Units Materials Conversion Work in process. Jan. 1 (80% complete with respect to conversion costs) 100,000 $100,000 $157,500 Units started into production 500,000 Costs added during the year: Materials $650,000 Conversion $997,500 Units completed during the year 450,000
4. Question : (TCO F) Weisinger Corporation has provided the following data for the month of January: Inventories Beginning Ending Raw materials $28,000 $29,000 Work In process $16,000 $14,000 Finished goods $42,000 $54,000 Additional Information Raw material purchases $56,000 Direct labor costs $87,000 Manufacturing overhead cost incurred $51,000 Indirect materials included in manufacturing overhead costs incurred $3,000 Manufacturing overhead cost applied to work in process $55,000
|
|
ACCT 505 Week 2 Quiz Job Order and Process Costing Systems
http://www.fres-courses.com/product/acct-505-week-2-quiz-job-order-and-process-costing-systems-devry |
ACCT 505 Week 2 Quiz Job Order and Process Costing Systems (DEVRY) 1. Question : (TCO F) For which situation(s) below would an organization be more likely to use a job-order costing system of accumulating product costs rather than a process costing system? 2. Question : (TCO F) Process costing would be appropriate for each of the following except: 3. Question : (TCO F) Lucas Company uses the weighted-average method in its process costing system. The company adds materials at the beginning of the process in the Forming Department, which is the first of two stages in its production process. Information concerning operations in the Forming Department in October follows: Units Material Cost Work in process on October 1 6,000 $3,000 Units started in October 50,000 $25,560 Units completed and transferred to next Department during October 44,000
4. Question : (TCO F) In a job-order costing system, the use of direct materials that have been previously purchased is recorded as a debit to: 5. Question : (TCO F) During December at Ingrim Corporation, $74,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $6,000. The journal entry to record the requisition from the storeroom would include a: 6. Question : (TCO F) Valles Corporation had $22,000 of raw materials on hand on February 1. During the month, the company purchased an additional $75,000 of raw materials. The journal entry to record the purchase of raw materials would include a: 1. Question : (TCO F) Whether a company uses process costing or job-order costing depends on its industry. A number of companies in different industries are listed below: i. Brick manufacturer Process Costing ii. Contract printer that produces posters, books, and pamphlets to order Job Order Costing iii. Natural gas production company Process Costing iv. Dairy farm Process Costing v. Coal mining company Process Costing vi. Specialty coffee roaster (roasts small batches of specialty coffee beans) Job Order Costing 2. Question : (TCO F) Job 484 was recently completed. The following data have been recorded on its job cost sheet: Direct materials $57,240 Direct labor hours 1,692 DLHs Direct labor wage rate $12 per DLHS Number of units completed 3,600 units
3. Question : (TCO F) Miller Company manufactures a product for which materials are added at the beginning of the manufacturing process. A review of the company's inventory and cost records for the most recently completed year revealed the following information: Units Materials Conversion Work in process. Jan. 1 (80% complete with respect to conversion costs) 100,000 $100,000 $157,500 Units started into production 500,000 Costs added during the year: Materials $650,000 Conversion $997,500 Units completed during the year 450,000
4. Question : (TCO F) Weisinger Corporation has provided the following data for the month of January: Inventories Beginning Ending Raw materials $28,000 $29,000 Work In process $16,000 $14,000 Finished goods $42,000 $54,000 Additional Information Raw material purchases $56,000 Direct labor costs $87,000 Manufacturing overhead cost incurred $51,000 Indirect materials included in manufacturing overhead costs incurred $3,000 Manufacturing overhead cost applied to work in process $55,000
|
|
ACCT 505 Week 2 Quiz Job Order and Process Costing Systems
http://www.fres-courses.com/product/acct-505-week-2-quiz-job-order-and-process-costing-systems-devry |
ACCT 505 Week 2 Quiz Job Order and Process Costing Systems (DEVRY) 1. Question : (TCO F) For which situation(s) below would an organization be more likely to use a job-order costing system of accumulating product costs rather than a process costing system? 2. Question : (TCO F) Process costing would be appropriate for each of the following except: 3. Question : (TCO F) Lucas Company uses the weighted-average method in its process costing system. The company adds materials at the beginning of the process in the Forming Department, which is the first of two stages in its production process. Information concerning operations in the Forming Department in October follows: Units Material Cost Work in process on October 1 6,000 $3,000 Units started in October 50,000 $25,560 Units completed and transferred to next Department during October 44,000
4. Question : (TCO F) In a job-order costing system, the use of direct materials that have been previously purchased is recorded as a debit to: 5. Question : (TCO F) During December at Ingrim Corporation, $74,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $6,000. The journal entry to record the requisition from the storeroom would include a: 6. Question : (TCO F) Valles Corporation had $22,000 of raw materials on hand on February 1. During the month, the company purchased an additional $75,000 of raw materials. The journal entry to record the purchase of raw materials would include a: 1. Question : (TCO F) Whether a company uses process costing or job-order costing depends on its industry. A number of companies in different industries are listed below: i. Brick manufacturer Process Costing ii. Contract printer that produces posters, books, and pamphlets to order Job Order Costing iii. Natural gas production company Process Costing iv. Dairy farm Process Costing v. Coal mining company Process Costing vi. Specialty coffee roaster (roasts small batches of specialty coffee beans) Job Order Costing 2. Question : (TCO F) Job 484 was recently completed. The following data have been recorded on its job cost sheet: Direct materials $57,240 Direct labor hours 1,692 DLHs Direct labor wage rate $12 per DLHS Number of units completed 3,600 units
3. Question : (TCO F) Miller Company manufactures a product for which materials are added at the beginning of the manufacturing process. A review of the company's inventory and cost records for the most recently completed year revealed the following information: Units Materials Conversion Work in process. Jan. 1 (80% complete with respect to conversion costs) 100,000 $100,000 $157,500 Units started into production 500,000 Costs added during the year: Materials $650,000 Conversion $997,500 Units completed during the year 450,000
4. Question : (TCO F) Weisinger Corporation has provided the following data for the month of January: Inventories Beginning Ending Raw materials $28,000 $29,000 Work In process $16,000 $14,000 Finished goods $42,000 $54,000 Additional Information Raw material purchases $56,000 Direct labor costs $87,000 Manufacturing overhead cost incurred $51,000 Indirect materials included in manufacturing overhead costs incurred $3,000 Manufacturing overhead cost applied to work in process $55,000
|