Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
90 Cards in this Set
- Front
- Back
In the presence of air, bacteria that use oxygen to break down remains into simpler molecules and recycled by ecosystem.
|
Aerobic Decomposition
|
|
Fossil fuels are produced when organic material is broken down into this kind of environment with little oxygen.
|
Anaerobic Environment
|
|
What do developing nations use energy for?
|
Towards growing, preparing food, and heating homes.
|
|
What do industrialized nations use energy for?
|
Transportation and industry.
- 89% of energy in the U.S comes from fossil fuels. |
|
Difference between energy required and energy invested.
|
Net Energy
|
|
Comparing energy resources. Energy returned divided by energy invested.
- Hint: 4 letter acronym |
EROI (Energy Returned On Investment)
|
|
What are the three major fossil fuels used today?
|
1. Coal
2. Natural Gas 3. Oil |
|
Organic matter compressed under high pressure to form dense, solid carbon structures. Also the most abundant fossil fuel.
|
Coal
|
|
Organic material broken down anaerobically but remains wet, near surface.
|
Peat
- As it is compressed, carbon compounds are packed forming coal. The greater the compression, the greater energy content per unit volume. |
|
What are the two methods to mine coal?
|
1. Near Surface: strip mining
2. Deep Underground: subsurface mining |
|
Fastest growing fossil fuel. Produces less pollution. Consists primarily of methane.
|
Natural Gas
|
|
Natural gas can arise from what two processes?
|
1. Biogenic gas: shallow depths by anaerobic decomposition.
2. Thermogenic gas: compression and heat deep underground. |
|
Forms only under certain conditions. Un-isolated deposits, tending to collect in porous layers beneath dense, impermeable layers.
|
Petroleum
|
|
The amount of a fossil fuel, in a deposit that is technological and economically feasible to remove under current conditions.
|
Proven Recoverable Reserve
|
|
Drilling small holes that ascend to great depths.
|
Exploratory Drilling
|
|
Oil production peaked in 1970. What was the name of this peak?
|
Hubbert Peak
|
|
Moist sand containing thick petroleum, rich in carbon, and poor in hydrogen.
|
Oil Sands
|
|
Sedimentary rock filled with kerogen processed to produce liquid petroleum.
|
Oil Shale
|
|
Ice-like solids consisting of methane molecules. What are the downsides of this thing?
|
Methane Hydrates
Downsides: - Energy values are low. - Sever environmental impacts. |
|
Name four impacts of fossil fuels.
|
1. Releases carbon dioxide, which is a greenhouse gas and this warms our planet, driving climate change.
2. Releases methane, a greenhouse gas. 3. Vehicles release sulfur dioxide and nitrogen oxides which contribute to industrial and photochemical smog and acidic deposition. 4. Pollutes water. |
|
The practice of reducing energy use to extend our nonrenewable resources.
|
Energy Conservation
|
|
What are two ways of energy conservation?
|
1. Personal Choice
2. Increased efficiency |
|
Energy that holds protons and neutrons together within the nucleus of an atom.
|
Nuclear Energy
- Converted to thermal energy to generate electricity. |
|
The reaction that drives this nuclear energy in power plants.
|
Nuclear Fission
- The splitting part of atomic nuclei. |
|
Slows the neutrons bombarding uranium, which is used for nuclear power because its atoms are radioactive.
|
Moderator
|
|
Renewable resources are growing at a faster rate than conventional energy resources. What is the leader in growth for renewable energy?
|
Wind Power
|
|
What is the main obstacle for the technology of renewable resources?
|
Politics.
- They receive far less subsidies, tax breaks, and incentives from government than most conventional sources. |
|
Consists of organic material that makes up living organisms.
|
Biomass Energy
- Harvested from many planets and animal matter. - Only renewable if it isn't over-harvested. - Some of these materials are burned to produce bio-power, generating heat of electricity. |
|
Biomass sources converted into fuels used primary to power automobiles.
|
Biofuel
|
|
What are the two primary biofuels?
|
1. Ethanol
2. Biodiesel |
|
Added to gasoline to reduce automotive emissions.
|
Ethanol
- Blended with up to 10% ethanol. |
|
Flexible fuel cars can run on what percent of ethanol and gasoline.
|
85% ethanol and 10% gasoline.
|
|
A fuel produced from vegetable oil, cooking grease or animal fat. Vehicles with diesel engines can run on 100 % diesel.
|
Biodiesel
- 100% diesel. Non-toxic and biodegradable. |
|
A process in which biomass is vaporized at high temperatures in the absence of oxygen.
|
Gasification
|
|
The kinetic energy of moving water to turn turbines and generate electricity.
|
Hydroelectric Power
|
|
Form of hydroelectric power. Immense amounts of water are stored behind dams. Water is stored in reservoirs, passes through a dam, turns the blades of turbines which causes a generator to generate electricity.
|
Storage Technique
|
|
Form of hydroelectric power. Generates electricity without greatly disrupting the flow of the river.
|
Run-of-River Approach
|
|
What are two clear benefits of using hydroelectric power?
|
1. Renewable
2. Cleanliness |
|
What are 3 negatives of hydroelectric power.
|
1. Alters riverine habitat above and below dam sites.
2. Disrupts natural flooding cycles and sediment deposition causing thermal pollution of downstream waters. 3. Reduces fish population and aquatic diversity. |
|
Most common way to harness solar energy. Buildings are designed and building materials are chosen to maximize direct absorption of sunlight in the winter.
|
Passive Solar Energy Collection
|
|
Make's use of technology to focus, move, or store solar energy.
|
Active Solar
|
|
Converts sunlight to electrical energy directly by making use of the photovoltaic effect.
|
Photovoltaic Cells
- Occurs when light strikes one of a pair of metal plates in a PV cell, causing the release of electrons. The flow of electrons from one plate to the other creates of electrical current. - Popular in undeveloped countries. |
|
What are two major disadvantages of using photovoltaic cells.
|
1. Not all regions are sunny.
2. Cost of equipment. |
|
Mechanical assembles that convert winds kinetic energy into electrical energy.
|
Wind Turbines
|
|
Radioactive decay of elements surrounded by the extremely high pressures of the interiors of our planet generates heat that rises to the surface through magma.
|
Geothermal Energy
|
|
What are three sources of the ocean that provide energy?
|
1. Ocean Tides
2. Ocean Waves 3. Ocean Currents |
|
Electricity is used to split hydrogen atoms from the oxygen atoms of water molecules. Produces pure hydrogen.
|
Electrolysis
|
|
Describes an area's long term atmospheric conditions (over a broader region).
|
Climate
|
|
Describes trends and variations of Earth's climate.
|
Global Climate Change
|
|
An increase in Earth's average surface temperature.
|
Global Warming
|
|
What three factors influence Earth's climate?
|
1. Sun
2. Atmosphere 3. Oceans |
|
The relative ability of one molecule of a given greenhouse gas to contribute to warming.
|
Global Warming Potential
|
|
Emissions of greenhouse gas from human activity consist mostly of what element?
|
Carbon Dioxide
|
|
Where is most carbon stored for long periods?
|
In the upper layer of the lithosphere.
|
|
Carbon dioxide increase due to what two reasons?
|
1. Burning of coal and fossil fuels.
2. Deforestation |
|
Methane increases due to what four reasons?
|
1. By tapping into fossil fuel deposits.
2. Raising livestock that emits gas as metabolic waste. 3. Disposing of organic material in landfills. 4. Growing certain crops (rice). |
|
Nitrous oxide increases due to what four reasons?
|
1. Byproduct of feedlots.
2. Chemical manufacturing plants. 3. Auto emissions. 4. Synthetic nitrogen fertilizers. |
|
What is the most abundant greenhouse gas?
|
Water Vapor
|
|
Microscopic droplets and particles that can cause warming or cooling.
|
Aerosols
|
|
Black carbon aerosols. Causes warming by absorbing solar energy, but most tropospheric aerosols cool the atmosphere by reflecting the sun's rays.
|
Soot
|
|
This type of aerosol slows the process of global warming.
|
Sulfate Aerosols
|
|
The amount of change in energy that a give factor causes.
|
Radiative Forcing
|
|
Worldwide current system in which warmer, fresher water moves along the surface in some areas, while colder, saltier moves deep beneath the surface.
|
Thermohaline Circulation
|
|
A systematic shift in atmospheric pressure, sea surface temperature and ocean circulation in the tropical Pacific Ocean.
|
El Niño - Southern Oscillation
|
|
How are El Niño's conditions triggered?
|
When air pressure increases in the Western Pacific and decreases in the Eastern Pacific, weakening the equatorial winds and allowing the warm water to flow eastward.
|
|
This system occurs when when cold surface waters extend far westward in the equatorial Pacific and weather patterns are effected in the opposite way.
|
La Niña
|
|
Name five approaches to measure climate change.
|
1. Direct Sampling
2. Proxy Indicators 3. Modeling 4. Future Impacts 5. Assessment report |
|
This type of sampling directly measures atmospheric conditioning
|
Direct Sampling
|
|
Types of indirect evidence that serves as proxies, or substitutes, for direct measurements and that shed light on past climate.
|
Proxy Indicators
|
|
Programs that combine what is known about atmospheric circulation, ocean circulation, atmospheric ocean interactions and feedback mechanisms to stimulate climate processes.
|
Modeling
|
|
Intergovernmental panel on climate change. Also released the Fourth Assessment Report.
|
Future Impacts
|
|
Represents the consensus of scientific climate research from around the world. Observed trends in surface temperature, precipitation patterns, snow and inc cover, sea levels, and storm intensity.
|
Fourth Assessment Report
|
|
Any unwanted material or substance.
|
Waste
|
|
Non-liquid waste, comes from homes.
|
Municipal Waste
|
|
Comes from production of consumer goods, mining, and agriculture.
|
Industrial Solid Waste
|
|
Solid or liquid waste that is toxic. Any other waste is considered waste water.
|
Hazardous Waste
|
|
What are the three main components of waste?
|
1. Minimizing amount of waste that we generate.
2. Recovering waste materials and recycling them. 3. Disposing of waste safely and effectively. |
|
Minimizing waste at the source.
|
Source Reduction
|
|
Flow of waste as it moves from its source toward disposal destinations.
|
Waste Stream
|
|
Accounts for over 70% of waste stream.
|
Municipal Solid Waste
- Paper products are the largest component. |
|
Waste is buried in the ground or piled up in large mounds to prevent from contamination.
|
Sanitary Landfills
|
|
Liquid that results when substances from the trash dissolve in water as rainwater percolates downwards.
|
Leachate
|
|
Also known as combustion, the controlled process in which mixed garbage is burned at very high temperatures.
|
Incineration
- Most North American Incinerators today are waste-to-energy. |
|
Conversion of organic waste into mulch or humus through natural biological processes of decomposition.
|
Composting
- Can be used to enrich soil. |
|
Consists of collecting materials that can be broken down and reprocessed to manufacture new items.
|
Recycling
|
|
What are the three steps to recycling?
|
1. Collecting and processing used recyclables goods and materials.
2. Items collected are taken to material recovery facilities. 3. Buying recycled goods. |
|
Seeks to redesign industrial systems to reduce inputs and to maximize both physical and economic efficiency.
|
Industrial Solid Waste
|
|
What are currently the largest source of unregulated waste?
|
Households
|
|
Why are many synthetic organic compounds are toxic?
|
They can be readily absorbed through the skin and can act as mutagens, carcinogens, teratogens, or endocrine disruptors.
|
|
Name the three disposal methods.
|
1. Landfills must have several impervious liners and leachate removal systems.
2. Liquid hazardous waste must be stored in must be stored in surface impoundment or ponds 3. Deep Well Injection, a well is drilled deep beneath the water table, into porous rock and wastes are injected into it. |