Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
36 Cards in this Set
- Front
- Back
Action options for HAZMAT operations level
|
nonintervention
defensive |
|
Action options for HAZMAT tech
|
defensive
nonintervention offensive |
|
Response objectives are based on:
|
estimated outcomes
stage of the incident |
|
Examples of Response objectives:
|
Change applied stress
Change breach size change quantity released Change size of the danger zone Change exposures contacted Change severity of harm |
|
Identify the four levels of PPE
|
Level A, B, C, D
|
|
What are the factors considered when selecting the proper respiratory protection?
|
Key is the level of PPE worn
Levels of concentration |
|
3 types of respiratory protection are:
|
SCBA
APR SAR |
|
What are the components of an APR?
|
Mask
Filter/catridge Harness |
|
What are the components of a SAR?
|
Mask
Airline Escape Unit Harness |
|
Identify the physical and psychological stresses that can affect users of specialized protected clothing.
|
Low dexterity/movement
Low visibility Comm Problems Heat stress/exhaustion Physical stress Claustrophobia |
|
What are three indications of material degradation of CPC?
|
Stiffness or excess pliability
Tears, cuts, abrasions Damage to zippers/closures |
|
What are the sources of tech info for selecting decon procedures?
|
CHEMTREC
MSDS's Product Manufacturer National Response Center Local/Regional PoisonControl |
|
What are the safety considerations to be included in developing your action plan?
|
Risk analysis
Site map/sketch Site work/control zones Buddy system Site communications CP location SOP's and safe work practices Medical assistance/triage Hazard monitoring plan Decon procedures |
|
Identify the points that should be made in a safety briefing prior to working at the scene.
|
- Meet levels of NFPA 472
- Risk analysis - Hot/warm zones supervised by branch officer - Accountability - Rehab for one hour - Safety officer - Radio/hand comm - PPE - Back up team - Entry team consists of two+ responders - Medical eval pre and post entry - Terrorism signs |
|
What are some types of atmospheric hazards at an incident?
|
Oxygen deficient
Oxygen enriched Flammable/Explosive Toxic |
|
What are some types of physical hazards at an incident?
|
Engulfment
Falls/slips Electrical Structural Mechanical |
|
Identify three pre-entry activities:
|
Vitals taken
Review action plan Safety briefing |
|
Identify the branch functions within the IMS:
|
Backup (RIT)
Decon Entry HAZMAT branch management HAZMAT safety officer Info/research Recon Resources |
|
What are some considerations to make when setting up a decon corridor?
|
Site Layout
Methods and equipment Number of personnel PPE Disposal Run-off control Emergency Med |
|
What are the levels of decon?
|
A - light hazard
B - med hazard C - extreme hazard D - dry decon (water reactive) E - etiologic R - radioactive |
|
Identify the types of decon methods:
|
Absorption
Adsorption Chem degradation Dilution Disposal Evaporation Neutralization Solidifictaion Vacuuming Washing |
|
What are three types of heat exchange units for CPC's?
|
Air cooled
Ice coled Water cooled |
|
Who establishes criteria for selecting the proper level of PPE at HAZMAT incidents?
|
EPA/OSHA
|
|
The incident action plan elements could include:
|
Site Description
Entry Objectives Orginization/Control Hazard Eval PPE Work Assignments Comm Procedures Decon Procedures |
|
What are some emergency procedures for personnel wearing vapor-protective clothing?
|
Loss of air supply
Loss of suit integrity Loss of verbal comm Buddy down in hot zone |
|
Absorption
|
process by which materials hold liquids
|
|
Adsorption
|
Substance attracts and holds another; produces heat and can spontaneously combust
|
|
Dilution
|
reduces concentration of contaminent; best used with water soluble materials
|
|
Disposal
|
direct removal of a contaminent from a carrier; may not remove all contamination
|
|
Chemical Degradation
|
natural breakdown of the contaminants as they age
|
|
List and describe the two ways to decontaminate something.
|
1 ) Physical - manually separate the chemical from material contaminated by scrubbing/washing
2) Chemically - adding another chem to change the properties of one chem into another to facilitate its removal |
|
What is the process for selecting the proper respiratory protection at an incident?
|
Name of chemical
Concentration Hazard Exposure OSHA requirements |
|
What are the risk assessments one needs to make when selecting the proper CPC for a specified action.
|
ID the hazard
Estimate exposure likelihood Consequence of exposure Risk |
|
What are the selection factors one needs to consider when selecting the proper CPC for a specified action.
|
Suit integrity
Chemical resistance Physical properties Design features Service life Cost |
|
What are the common methods for product transfer for non-pressurized cargo tanks?
|
Vacuum pumps and PTO pumps
|
|
What is involved with the pressure transfer for MC -331/338 cargo tanks?
|
compressed air
vapor compressor/liquid pump vapor pressure |