Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
46 Cards in this Set
- Front
- Back
|
What are assigned to manuals for the purpose of identification? |
Code Numbers |
|
|
Code numbers are identified as the conventional number system and the what? |
Technical Manual Identification Numbering System(TMINS) |
|
|
Navair manual conventional number system consist of what and divided into three parts? |
Prefix and combination of numbers and letters |
|
|
Navair manual conventional numbering system is divided into how many parts separated by dashes?
|
Three |
|
|
What identifies the command responsible for developing and maintaining the manual? |
Technical Manual Prefix |
|
|
Part 1 of the Technical Manual number is a two digit number may have an added letter that designates what? |
General subject classification / Major Category |
|
|
Part 2 of the Technical Manual Number is numbers or letters that identify what? |
Basic Aircraft model, manufacture of A/C, and or Engine |
|
|
Part three of TM may or may not be identifiable but identifies what? |
A particular type of manual |
|
|
Additional numbers maybe added to Technical Manual number to do what? |
Indicate system grouping breakout by volume |
|
|
Periods in a Technical Manual should only be used when a manual is part of what? |
A multivolume set due to its size and requires more than one 3 in a binder. |
|
|
In many Technical Manuals number assignments the suffix numbers are assigned in what and why? |
Numerical Sequence and Identification purposes only. |
|
|
Technical Manuals currently assigned a what will not be renumbered under the technical Manual Identification Numbering System (TMINS)? |
Navair Number |
|
|
Technical Manual Identification Numbering System(TMINS) is a numbering system developed in coordination with who? |
Other Systems Commands
|
|
|
What version of the Technical Manual Identification Numbering System was implemented by NATEC |
Navair |
|
|
The Intent of what, was to provide a single user oriented numbering and indexing system and to satisfy the requirements of the Naval Material Systems Command for identifying, referencing and requisitioning of Technical Manuals and their associated revisions/changes? |
Technical Manual Identification Numbering System(TMINS) |
|
|
Technical Manual Identification Numbering System(TMINS) assigns each Technical Manual a unique identifying alphanumeric number patterned after what? |
the 13 digit stock number |
|
|
Technical Manual Identification Numbering System(TMINS) contains a provision for adding a suffix using a C for what and a S for what? |
Confidential and Secret |
|
|
Technical Manual Identification Numbering System(TMINS) are not to be used for requisitioning purposes. Use what for requisitioning? |
Stock Numbers |
|
|
What is a 13 digit alphanumeric technical manual code number developed using Command, Commodity, Weapon System Designation, Subject Identifiers, Work Unit Codes, and Acronyms? |
Technical Manual Identification Numbering System(TMINS)
|
|
|
Using what is an integral part of the NAVICP Philadelphia supply operation? |
Stock Numbers and Bars codes |
|
|
Who manages NAVAIR Technical Manual warehouse stock as items of supply? |
NAVICP Philadelphia |
|
|
By adding what to the title page of each Technical Manual, the item manager at NAVICP Philadelphia can provide positive identification and timely instruction on where the stock should go? |
Stock numbers and bar codes |
|
|
According to which instructions a stock number and/or bar code has appeared in the lower left corner on title pages of all NAVAIR Technical Manuals distributed after 1 August 1986? |
NAVSUPINST 5600.25 & .26 |
|
|
How many positions in a CDROM numbering system? |
13 positions |
|
|
On a CDROM numbering system positions one through four will always be what? |
A1-CD |
|
|
Positions five through seven on a CDROM will indicate what? |
Type of Manual(F18) |
|
|
Positions eight through 10 will indicate what on a CDROM?
|
The type of manual when three digits are not sufficient |
|
|
What are zero's used for? |
Placeholders |
|
|
Positions 11 through 13 will be used for what? |
Will be in a sequence beginning with 001 |
|
|
The designator 11-100 indicates the material contained within is what? |
Cartridge Actuated Devices |
|
|
What are positions five through 10 on CD numbering? |
UIC |
|
|
Positions 11 through 13 are alphabetical what on a CDROM |
Serial Code starting with AAA for the 1st CD |
|
|
Who has established a centralized management program for the acquisition and maintenance of what? |
NAVAIR/TECHNICAL MANUALS |
|
|
Technical Manual Management Agency(TMMA) refers to what instruction? |
NAVAIRINST 5600.9 |
|
|
The acquisition and maintenance of all technical manuals must effectively managed through the life cycle of what? |
The system/equipment that it supports |
|
|
Who is the NAVAIR designated Technical Manual Management Agency (TMMA)? |
NATEC |
|
|
Who is responsible for implementing Technical Manual Policy and managing and coordinating the NAVAIR Technical Manual program? |
NATEC |
|
|
Primary Management for technical manuals are vested in the what? |
NATEC Technical Data Logistics Element Management Department |
|
|
Quality Assurance Program refers to what instruction? |
NAVAIRINST 5600.20 |
|
|
What must be maintained to assure the adequacy, accuracy, and usability of technical documentation? |
Technical Manual Quality Assurance Program |
|
|
For a Technical Manual to be of use in Navy Fleet maintenance environment its information must be accurate, adequate in depth and scope of coverage, clear in meaning, usable and complete is apart of who's objectives? |
Quality Assurance Program |
|
|
What is the means used to assure that Technical Manuals are adequate accurate and usable? |
Quality Assurance |
|
|
The primary objective of the what is to ensure an adequate understanding of all contractors quality assurance requirements relative to a specific Technical Manual Acquisition? |
Quality Assurance Program Planning Conference |
|
|
The Quality Assurance Program Planning Conference establishes what? |
Contacts and provide guidance |
|
|
Who will coordinate and schedule a guidance meeting at a negotiated site? |
NATEC QA BRANCH
|
|
|
What is specifically designed and implemented to generate improved government quality control/contractor coordination and communication during the technical manual preparation stages? |
In Process Review |
